This chapter describes the procedure for configuring a storage cluster of VSP One SDS Block from Google Cloud Marketplace. For how to register a compute node and how to create a volume, see the VSP One SDS Block and SDS Cloud System Administration.
If a failure occurs when configuring a storage cluster, take action according to the VSP One SDS Block and SDS Cloud Troubleshooting Reference.
Information about Google Cloud windows shown in procedures of this manual is based on the information available as of November, 2024. Information about Google Cloud windows is subject to change. If any information about Google Cloud windows is changed, replace the information shown in this manual with that released by Google Cloud.
The procedure for setting up VSP One SDS Block from Google Cloud Marketplace is as follows.
|
Step No. |
Task overview |
Reference |
|---|---|---|
|
1 |
Check the files that are required for setup. |
|
|
2 |
Confirm prerequisites for setup. |
|
|
3 |
Prepare the Google Cloud environment for setting up VSP One SDS Block. |
|
|
4 |
Configure a storage cluster. You must agree to SUSE Linux Enterprise and Cavium's EULA. |
|
|
5 |
Create an initial user for the storage cluster. |
|
|
6 |
Use the initial user that you created to verify the configuration of the storage cluster. |
|
|
7 |
Issue an authentication ticket for dumping in the event of a failure. |
|
|
8 |
Register the service ID of the storage cluster. |