By turning on the locator LED, the drive to be replaced can be easily recognized.
-
Required role: Storage or Service
-
The configuration must conform to the VSP One SDS Block Hardware Compatibility Reference.
-
Specify the drive in the Drives list window or Drive detailed information
window by either of the following means.
-
In the Drives list window, select the drive to be edited (1 to 25 drives), click the preceding icon to the right of the Monitor link icon, and then select Turn On/Off Locator LEDs.
-
In the Drives list window (displayed as inventory view), click the preceding icon displayed for the drive to be edited, and then select Turn On/Off Locator LEDs.
-
Click the preceding icon in the Drive detailed information window for the drive to be edited, and then select Turn On/Off Locator LEDs.
The locator LED on/off dialog is displayed.
-
-
Specify on or off by clicking Turn On or Turn
Off, respectively.
-
TurnOn: Turns on the LED.
-
TurnOff: Turns off the LED.
-
-
Verify the displayed information, and then click
Submit.
The locator LED on/off dialog is closed and the locator LED is turned on or off.