Replace the faulty drive.
-
Required role: Storage
- Perform step 1 to step 4 in Removing drives (Bare metal).
-
Perform the operation described in Adding drives.
CAUTION:
Before going to step 3, verity that a faulty drive to be removed exists. If a faulty drive to be removed does not exist, perform only step 12 in Removing drives (Bare metal) and end the procedure.
If you replace multiple drives at the same time, perform the operation for each drive. When step 2 is completed for all the drives, continue the procedure from step 3.
Verify that the drive to be added is a new drive, not the faulty drive detached in step 1.
- Perform step 5 and the subsequent steps in Removing drives (Bare metal).