You can add drives to increase the capacity of storage pools.
Contact customer support of a list of compatible hardware.
When you use the Data at rest encryption function, verify that you already performed the procedures for enabling the encryption environment settings and storage pool encryption settings described in Using Data at rest encryption in the VSP One SDS Block System Administrator Operation Guide. If you completed setup according to the VSP One SDS Block Setup and Configuration Guide for your model, procedures for enabling the encryption environment settings and procedures for enabling the settings of storage pool encryption have already been completed. After you have completed the procedures described in this section, encryption environment settings and storage pool encryption settings cannot be changed.
-
Required role: Storage
-
Add drives in the Drives list window or Drive detailed information window by
either of the following means.
A drive can be added when STATUS of the drive to be added is "Offline."
-
In the Drives list window, select the drive to be edited (1 to 1,024 drives), click the preceding icon to the right of the Monitor link icon, and then select Add Drives.
-
Click the preceding icon displayed for the drive to be edited in the Drives list window (displayed as inventory view), and then select Add Drives.
-
Click the preceding icon in the Drive detailed information window for the drive to be edited, and then select Add Drives.
The drive addition dialog is displayed.
-
-
Verify the displayed information, and then click
Submit.
The drive addition dialog is closed and drive addition is performed.