Reconnect compute nodes and all the compute ports in full mesh as follows.
When the compute nodes have been registered by using the VSP One SDS Block Administrator, the nodes are connected in full mesh. Therefore, you do not need to perform this procedure.
A compute node not in a full-mesh connection is marked as (not fullmeshed) in the PORT CONNECTIONS item on the Compute Node detailed information window. In this case, you can perform the following operations:
Performing the following procedure enables setting a path of a compute node in full mesh irrespective of the wiring. If you want to set a compute node path between only a specific initiator and specific compute node, do so from the REST API or CLI. Connection information is displayed in the port connection list in the Compute Node detailed information, in which "-", which indicates unconnected status, is displayed when there is any initiator for which no path is set. For details about how to set a path of a compute node by using the REST API or CLI, see Compute node connection management in the VSP One SDS Block REST API Reference and VSP One SDS Block CLI Reference.
-
Required role: Storage or VpsStorage
-
Click the following icon in the Compute Node detailed information window. From the menu
that opens, select Configure Port Connections.
The following dialog appears.