Editing compute nodes

Virtual Storage Platform One SDS Block Storage Administrator Guide
Version
1.17.x
Audience
anonymous
Part Number
MK-24VSP1SDS002-04

Edit information about the intended compute node as follows.

  • Required role: Storage or VpsStorage

  1. In the Compute Nodes window or the Compute Node detailed information window, edit the information by using one of the following methods:

    • In the Compute Nodes window, select the edit-target compute node (one node), and then click the preceding icon shown to the right of Select All.

    • Change the view mode of the Compute Nodes window to Inventory view, and then click the preceding icon shown for the edit-target compute node.

    • In the Compute Node detailed information window for the edit-target compute node, click the preceding icon.

    The following dialog appears.

    (Bare metal)

    (Cloud)

  2. You can edit the following parameters:

    • COMPUTE NODE NAME: The nickname of the compute node

    • OS TYPE: The OS type of the intended compute node

    • (Bare metal) FC WWNS: WWN in the case of FC connection

      This is not used for iSCSI connection or NVMe/TCP connection. Do not enter this parameter.

    • ISCSI INITIATOR NAMES: The iSCSI name in the case of iSCSI connection

      This is not used for FC connection or NVMe/TCP connection. Do not enter this parameter.

    • (Bare metal) HOST NQNS: host NQN in the case of NVMe/TCP connection

      This is not used for FC connection or iSCSI connection. Do not enter this parameter.

    Clicking + Add FC WWN, + Add iSCSI Initiator Name, or +Add Host NQN displays an additional input field. To the right of the input field, there is an x icon. To remove the entry field, click the x icon.

  3. Click Submit.
  4. When one of the following "Completed" messages is displayed, processing is completed.

    • When you modified COMPUTE NODE NAME or OS TYPE: Successfully edited compute node info. (Compute node Name: XXX)

    • When you added or modified the HBA information: Successfully configured port connections.

    • When you only deleted the HBA information: Successfully deleted initiator of compute node.