Message ID |
Message |
---|---|
KARS27200-E |
The capacity of the memory is insufficient. (Job ID = xxx) [Event Name] Storage node addition did not succeed (Insufficient memory) [Category] StorageNode [Solution] Restart the storage cluster, and then retry the operation. If EC2 instances of the storage node to be added were created, delete the EC2 instances before the retry. To delete them, follow the VSP One SDS Block Troubleshooting Guide. If the phenomenon persists, collect the logs, and then contact customer support. |
KARS27201-E |
An operation that can not be performed concurrently is being performed. (Job ID = xxx) [Event Name] Storage node addition did not succeed (Prohibited concurrent operation) [Category] StorageNode [Solution] Wait until the operation that cannot be performed concurrently completes, and then retry the operation. If EC2 instances of the storage node to be added were created, delete the EC2 instances before the retry. To delete them, follow the VSP One SDS Block Troubleshooting Guide. If the phenomenon persists, collect the logs, and then contact customer support. |
KARS27202-E |
The number of storage nodes after the addition exceeds the upper limit. (Job ID = xxx) [Event Name] Storage node addition pre-check (Max. number of storage nodes exceeded) [Category] StorageNode [Solution] Review the maximum number of supported storage nodes and the number of storage nodes to be added, and then retry the operation. If EC2 instances of the storage node to be added were created, delete the EC2 instances before the retry. To delete them, follow the VSP One SDS Block Troubleshooting Guide. |
KARS27203-E |
An error occurred during verification of software versions of the storage node to be added. (Job ID = xxx, Version of storage cluster = xxx, Version of the storage node to be added = xxx) [Event Name] Storage node addition pre-check (Software version mismatch) [Category] StorageNode [Solution] Verify that the software version of the storage node to be added matches that of the storage cluster, and then retry the operation. If EC2 instances of the storage node to be added were created, delete the EC2 instances before the retry. To delete them, follow the VSP One SDS Block Troubleshooting Guide. |
KARS27204-E |
Adding storage nodes ended abnormally because a failure occurred in the cluster master node (primary). (Job ID = xxx) [Event Name] Storage node addition did not succeed (Storage cluster master node (primary) failover) [Category] StorageNode [Solution] If there are blocked storage nodes, recover them. Verify whether there are storage nodes to be removed, and then remove them. If EC2 instances of the storage node to be added were created, delete them, and then retry the operation. To delete them, follow the VSP One SDS Block Troubleshooting Guide. If the phenomenon persists, collect the logs, and then contact customer support. |
KARS27205-E |
The number of compute ports after the addition exceeds the upper limit. (Job ID = xxx) [Event Name] Storage node addition did not succeed (Max. number of compute ports exceeded) [Category] StorageNode [Solution] Review the maximum number of supported compute ports and the number of compute ports to be added, and then retry the operation. If EC2 instances of the storage node to be added were created, delete the EC2 instances before the retry. To delete them, follow the VSP One SDS Block Troubleshooting Guide. |
KARS27206-E |
An error occurred in the DNS settings. (Job ID = xxx, Storage node = xxx, DNS server = xxx) [Event Name] The storage nodes could not be added (DNS setting did not succeed) [Category] StorageNode [Solution] If EC2 instances of the storage node to be added were created, delete them, and then retry the operation. To delete them, follow the VSP One SDS Block Troubleshooting Guide. If the phenomenon persists, collect the logs, and then contact customer support. |
KARS27207-E |
Storage node addition could not be completed because storage controllers could not be relocated. (Job ID = xxx) [Event Name] Storage controllers cannot be relocated [Category] StorageNode [Solution] If any of the storage nodes in the storage cluster are under maintenance, complete the processing for the storage nodes. If any of the storage nodes in the storage cluster are blocked, recover the storage nodes. After that, if EC2 instances of the storage node to be added were created, delete them, and then retry the operation. To delete them, follow the VSP One SDS Block Troubleshooting Guide. |
KARS27210-E |
FaultDomainName of each storage node to be added must be different. (Job ID = xxx) [Event Name] Storage node addition pre-check (FaultDomainName of the storage node to be added invalid) [Category] StorageNode [Solution] Review FaultDomainName of the storage nodes to be added to verify whether there is a problem. Correct any problem, as necessary. If EC2 instances of the storage nodes to be added were created, delete them, and then retry the operation. To delete the EC2 instances, follow the VSP One SDS Block Troubleshooting Guide. If the problem persists, collect the logs, and then contact customer support. |
KARS27211-E |
The user data protection type xxx is not supported. (Job ID = xxx) [Event Name] Storage node addition pre-check (User data protection type unsupported) [Category] StorageNode [Solution] Review the user data protection type to verify whether there is a problem. Correct any problem, as necessary. If EC2 instances of the storage nodes to be added were created, delete them, and then retry the operation. To delete the EC2 instances, follow the VSP One SDS Block Troubleshooting Guide. If the problem persists, collect the logs, and then contact customer support. |
KARS27212-E |
The number of storage nodes to be added must be xxx. [Event Name] Storage node addition pre-check (Number of additional storage nodes invalid) [Category] StorageNode [Solution] Review the number of storage nodes to be added to verify whether there is a problem. Correct any problem, as necessary. If EC2 instances of the storage nodes to be added were created, delete them, and then retry the operation. To delete the EC2 instances, follow the VSP One SDS Block Troubleshooting Guide. If the problem persists, collect the logs, and then contact customer support. |