This chapter describes the procedure for configuring a storage cluster of VSP One SDS Block from AWS Marketplace. For how to register a compute node and how to create a volume, see the VSP One SDS Block System Administrator Operation Guide.
If a failure occurs when configuring a storage cluster, take action according to the VSP One SDS Block Troubleshooting Guide.
Amazon Web Services (AWS) screen information in this manual procedure is based on information as of August 2023. AWS screen information is subject to change. If there are any changes to the AWS screen information, please replace it with the information released by AWS.
The procedure for setting up VSP One SDS Block from AWS Marketplace is as follows.
|
Step No. |
Overview of the work |
See: |
|---|---|---|
|
1 |
Check the files that are required for setup. |
|
|
2 |
Confirm prerequisites for setup. |
|
|
3 |
Configure a storage cluster. You must agree to SUSE Linux Enterprise and Cavium's EULA. |
|
|
4 |
Build a controller node that meets Controller node requirements. |
|
|
5 |
Create an initial user for the storage cluster. |
|
|
6 |
Use the initial user that you created to verify the configuration of the storage cluster. |
|
|
7 |
Issue an authentication ticket for dumping in the event of a failure. |
|
|
8 |
Register the service ID of the storage cluster. |