The following figure shows the rear panel
components.
The following table shows the ports and connectors on the server rear panel:Figure. Server rear panel components for
model VSP One File 32
Note: Do not use any ports or connectors that are
not described in this table without guidance from technical support.
| Item | Connectivity | Qty | Description |
|---|---|---|---|
| 1 | Clustering ports 10 GbE | 4 |
For cluster management and
heartbeat, connect to:
|
| 2 | IPMI port | 1 | Connection to the internal Ethernet switch of the rack |
| 3 | 10 GbE network ports | 6 | Connection to external 10 Gbps Ethernet data network |
| 4 | Storage or FC switch | 4 | Connection to disk systems or (where present) to the FC switches |
| 5&6 | n/a | 3 | Plastic handles Caution: Do not lift the server by these handles. |
| 7 | PSU 1 | 1 | Power Supply Unit 1 |
| 8 | PSU 2 | 1 | Power Supply Unit 2 |
| 9 | RS-232 | 2 | Management interface. (Reserved for Customer Service Engineer access only.) |
| 10 | USB Ports | 1 | USB port. (Reserved for Customer Service Engineer access only.) |
| 11 | USB Ports 3.0 | 1 | USB 3.0 port. (Reserved for Customer Service Engineer access only.) |
| 12 | ETH0 1000baseT Ethernet | 1 | External system management. Connect to the customer's management switch. |
| 13 | ETH1 1000baseT Ethernet | 1 | Management port. Connect to the internal Ethernet switch of the rack. |
| 14 | Video port | 1 | Video management interface port. (Reserved for Customer Service Engineer access only.) |