The following figure shows the rear panel components for the Hitachi Virtual Storage Platform One File server models:
The following table shows the ports and connectors on the server rear panel:Figure. Server rear panel components for models VSP One File 34 / VSP One File 38
Note: Do not use any ports or connectors that are not described in this table without guidance from technical support.
| Item | Connectivity | Qty | Description |
|---|---|---|---|
| 1 & 2 | 10/25 GbE network ports | 8 | Connection to external 10/25 Gbps Ethernet data network. Ports 1-6 are 10/25 Gbps capable, ports 7 & 8 are 25 Gbps only. |
| 3 | 10/25 GbE Clustering ports | 4 |
For cluster management and heartbeat, connect to:
|
| 4 | FC ports | 4 | Direct connection to disk systems or tape libraries or SAN fabric. |
| 5 | PSU 1 | 1 | Power Supply Unit 1 CAUTION: Do not lift the server by the PSU handle.
|
| 6 | PSU 2 | 1 | Power Supply Unit 2 CAUTION: Do not lift the server by the PSU handle.
|
| 7 | IPMI v2.0 port | 1 | Connection to the internal Ethernet switch of the rack |
| 8 & 9 | USB Ports | 4 | USB port. (Reserved for Customer Service Engineer access only.) |
| 10 | ETH1 1000baseT Ethernet | 1 | Management port. Connect to the internal Ethernet switch of the rack. |
| 11 | ETH0 1000baseT Ethernet | 1 | External system management. Connect to the customer's management switch. |
| 12 | Video port | 1 | Video management interface port. (Reserved for Customer Service Engineer access only.) |
| 13 | RS-232 | 1 | Management interface. (Reserved for Customer Service Engineer access only.) |