Deploy the VSP One File management software operating system (OS).
Download the VSP One File installation file for the latest release to a local system. For instructions about how to download the file, see Downloading the VSP One File management software.
- Start Virtual Machine Manager, and click .
- On the Create New Virtual Machine page, click Import existing disk image, and then click Forward.
- On the Locate or create storage volume page, select the VSP One File installation file, and then click Choose Volume.
- On the Create New Virtual Machine (Step 2) page, select Debian 10, and then click Forward.
- On the Create New Virtual Machine (Step 3) page, set the memory to a minimum of 8 GB/8192MiB and the CPUs to 4, and then click Forward.
- On the Create New Virtual Machine (Step 4) page, select the network, and then click Finish.
- At the Do you want to configure DHCP prompt, specify whether you want to use the Dynamic Host Configuration Protocol (DHCP) to automatically configure the IP address and other network configuration parameters for the virtual machine.
- To use DHCP, enter yes. At the prompts, enter the following information:
- Username
- Password
- Hostname
- To configure the IP address and network configuration parameters manually, enter no. At the prompts, enter the following information:
- Username
- Password
- Hostname
- IP address
- Netmask
- Gateway IP address
- DNS server IP address
- Domain name
- Timezone setup (yes or no)
If you enter yes, complete the information at the prompts to set the timezone.
- To use DHCP, enter yes. At the prompts, enter the following information:
The installation completes. Login information and the IP addresses for the virtual machine are shown.