The VSP One Block 20 storage systems run on single-phase AC 200V power. The AC power input power for the storage systems is duplexed across the PDUs, enabling the equipment installed in the rack to remain powered on if power is removed from one of the two power distribution panels.
The following table lists the input power specifications for the VSP One Block 20 storage systems.
Item | Component | Specification |
---|---|---|
Rated power | Controller | 1,960 VA |
Drive box | 800 VA | |
Input power1 | Controller | Single-phase AC 200 V to 240 V 50 Hz/60 Hz |
Drive box | ||
Input current1,2 | Controller | 9.8 A |
Drive box | 4.0 A | |
Steady current3 | Controller | 4.9 A |
Drive box | 2.0 A | |
Leakage current | Controller | 1.75 mA |
Drive box | ||
Inrush current | Controller | 1st (0-p): 30 A 2nd (0-p): 20 A 1st (0-p) time: 25 ms |
Drive box | 1st (0-p): 30 A 2nd (0-p): 25 A 1st (0-p) time: 25 ms |
|
Power cord plug type | Controller | IEC60320 C14 |
Drive box | ||
Notes:
|