The storage system must be fully configured before being attached to the Solaris host, as described in Hitachi storage system configuration.
- Devices types
- The following devices types are supported for Solaris operations. For details, see Logical device types.
-
- OPEN-V
- OPEN-3/8/9/E/L
- VLL (OPEN-x VLL)
- Cross-OS File Exchange (FX) (OPEN-x-FXoto)
- Host mode
- The required host mode for Solaris is 09. Do not select a host mode other than 09 for Solaris. For a complete list of host modes for the storage system, see Host modes and host mode options. For instructions on setting the host modes, see the Provisioning Guide for the storage system. Note: You must set HOST MODE=09 before installing Sun Cluster, or the Quorum Device will not be assigned to the storage system.
- Host mode options
- You may also need to set host mode options (HMOs) to meet your operational requirements. For a complete list of HMOs for the storage system, see Host modes and host mode options. For instructions on setting the HMOs, see the Provisioning Guide for the storage system.