The following table lists potential error conditions that might occur during storage system installation on a Red Hat Linux host and provides instructions for resolving the conditions. If you cannot resolve an error condition, contact customer support.
| Error Condition | Recommended Action |
|---|---|
| The logical devices are not recognized by the system. | Be sure that the READY indicator lights on the storage
system are ON. Be sure that the LUNs are properly configured. The LUNs for each target ID must start at 0 and continue sequentially without skipping any numbers. |
| The file system cannot be created. | Be sure that the device name is entered correctly with
mkfs. Be sure that the LU is properly connected and partitioned. |
| The file system is not mounted after rebooting. | Be sure that the system was restarted properly. Be sure that the auto-mount information in the /etc/fstab file is correct. |