The storage system can be physically connected to the host system after configuring the storage system and the host. Some of the steps are performed by the Hitachi Vantara representative, and some are performed by the user.
Note: The Hitachi Vantara representative must use the Maintenance Manual for the storage system during all installation activities. Follow all precautions and procedures in the Maintenance Manual, and always check all specifications to ensure proper installation and configuration.
- Verify the storage system installation. The Hitachi Vantara representative verifies the configuration and operational status of the storage system ports, LDEVs, and paths.
- Shut down and power off the host..The user shuts down and powers off the host. The power must be off when the FC/FCoE/iSCSI cables are connected.
- Connect the storage system to the host system. The Hitachi Vantara representative connects the cables between the storage system and the host or switch. Verify the ready status of the storage system and peripherals.
- Power on and boot the host system after the storage system has been connected.