iSCSI port assignments
iSCSI ports are available with optical or copper Ethernet ports:
- Optical iSCSI port: Use a single-mode or multimode XFP optical cable.
- Copper iSCSI port: Use a Category 5 or better Ethernet LAN cable.
- Pull all the optical or STP cables into the rack frame, passing them through the cable opening at the bottom.
- Connect the optical or STP cables to the connector of each port.
Insert the cables until they are fixed to the Small Form-Factor Pluggable (SFP). Check that the cable latch clicks and that the cables are securely connected.
- Fix the optical or STP cables to the clamp with binders of the cable passing through the opening on the bottom plate.
- Connect the optical or STP cables to the host devices.
Register with Hitachi Vantara support.