Adding remote paths

Virtual Storage Platform One Block Administrator User Guide
Version
A3-02-2x
Audience
anonymous
Part Number
MK-23VSP1B001-00

Add remote paths to an already-configured remote path group to configure redundant remote paths between the two storage systems that make up a global-active device environment.

  • Identify the following items:
    • The ID of the path group
    • The port to use on the connection-source storage system and the port of the connection-destination storage system
    • For iSCSI, the IP address and TCP port number of the connection-destination storage system
  • Make sure that the user performing the procedure is assigned the Storage Administrator (Remote Copy) role.
  1. From the navigation tree, select Replication > Remote > Remote Path Groups.
  2. From the inventory of remote path groups, select the check box for the target remote path group, and then click Add Remote Paths in the action bar.
  3. Specify the required items, and then add the remote path.

    Make sure that the status of the remote path you added is Normal.

    Note:

    If the status of the remote path is not Normal, see the Global-Active Device User Guide.