Follow this procedure to test SNMP trap reporting by sending a test trap.
An IP address and community have been added in the
Set Up Alert Notifications window.
You must have the Storage Administrator
(Initial Configuration) role to perform this task.
-
In the maintenance utility, open the Alert
Notifications window.
-
Select the
SNMP tab.
-
Click
Send Test SNMP Trap.
Reports the test SNMP trap to the community or user registered in the storage system. Reports the events registered in the storage system instead of the events that are set on the
SNMP tab. If you want to test the events set on the
SNMP tab, click
Finish and apply to the storage system, and then report the test SNMP trap.
-
Verify whether the SNMP trap report (reference code 7fffff) is received by the SNMP manager that has the IP address specified for Sending Trap Setting in the Alert Notifications window.
Note:
If the SNMP trap report cannot be received, check the following to solve
the problem: