You must log in to
Storage Advisor Embedded.
Identify the following items:
- If you are using Google Chrome
- Make sure that the pop-up blocker is disabled.
- If you are using Internet Explorer
- Make sure the pop-up blocker is disabled.
- Make sure Compatibility View is off.
- Make sure the Font download option is enabled.
- Protocol
For non-SSL communication, use
http. For SSL communication, use
https.
- IP address of the storage system
Use the IP address of CTL1 or CTL2, as specified in the maintenance utility.
-
Open a web browser and specify the following URL:
protocol://IP-address-of-storage-system/
Note:
If the web browser repeatedly fails to open, close all active browser windows, and then clear the web browser's cache.
If the web browser fails to open even after the cache has been cleared, start the maintenance utility by specifying the following URL, and then check for alerts:
protocol://IP-address-of-storage-system/MaintenanceUtility/
To check for alerts, log in as a user registered in the Maintenance user group (a built-in user group).
-
Enter a user name and password, and then log in.
Use the following account when logging in for the first time:
User name: maintenance
Contact your administrator for the password.
The account will be locked for 60 seconds after three consecutive unsuccessful login attempts.