VSP F350 mechanical specifications

Physical dimension

(W x D x H) (mm)

483 × 813 × 88 mm

Weight/Mass

16.1 kg

Start-up time (min)¹

5 to 8 (min)

Required height

(EIA unit)²

2U

Heat output (W)

218 W

Power consumption (VA)

226 VA

Air flow (m³/min)³

4.0 (m³/min)

Physical dimension

(W x D x H) (mm)

482 × 565 × 88.2 mm

Weight/Mass (kg)

(Approximate)

17 kg

Start-up time (min)¹

5 to 8 (min)

Required height

(EIA unit)²

2U

Heat output (W)

116 W

Power consumption (VA)

126 VA

Air flow (m³/min)³

2.2 (m³/min)

Supported data capacity

472.61, 945.23, 1890.46, 3780.92, 7561.85, 15048.49, 30095.00 GB

Maximum storage system capacity (physical capacity)

2,627 TiB (using 15 TB 2.5-inch SFF SSD)

Maximum mountable quantity (unit)¹

24 (total per chassis)

192 (maximum per system)

Maximum number of spare drives²

16

Interface type

16/32 Gbps FC (Optical)

10 Gbps iSCSI (Optical)

10 Gbps iSCSI (Copper)

Data transfer speed

(Max. speed for transfer to host)

400 Mbps (FC)

800 Mbps (FC)

1600 Mbps (FC)

3200 Mbps (FC)

1000 Mbps (iSCSI - Optical)

1000 Mbps (iSCSI - Copper)

Number of ports

16/32 Gbps FC (Optical): 16

10 Gbps iSCSI (Optical): 8

10 Gbps iSCSI (Copper): 8

Transferred block size

(bytes)

512

Maximum number of hosts via FC switch

255

Maximum number of hosts via network switch

255

Up to 75.2º F (24º C)

Up to 86º F (30º C)

Up to 93.2º (34º C)

Up to 104º (40º C)

RAID level^*

Flash drive mounted: 1/5/6

RAID configuration

RAID1: 2D+2D, 4D+4D

RAID5: 3D+1P, 4D+1P, 6D+1P, 7D+1P

RAID6: 6D+2P, 12D+2P, 14D+2P

Maximum number of parity groups

64

Maximum volume size

3 TB (when using the LDEVs of other Storage Systems: 4TB)

Maximum volumes/host groups and iSCSI targets

2048

Maximum volumes/parity groups

2048

^*A storage system configured with RAID6, RAID 5, or RAID 1 provides redundancy and enhances data reliability. However, there is still a possibility of losing data caused by unforeseeable hardware or software failure. Users should always follow recommended best practices and back up all data.

Control memory

Flash memory: 32 MB

L3 cache memory: 4 MB

SDRAM: 1 GB

Data assurance method

Data bus: Parity

Cache memory: ECC (1 bit correction, 2 bit detection)

Drive: Data assurance code

Capacity (GB per system)

128 GB

Control method

Read LRU/Write after

Battery backup

Provided

Backup duration^*

Unrestricted (Saving to a nonvolatile memory)

^*Non-volatile data in the cache memory is protected against sudden power failure. The backup operation writes data into a cache, even if a power interruption occurs, and transferred to the cache flash memory.

Insulation withstand voltage

AC 1,500 V (100mA, 1min)

Insulation resistance

DC 500 V, 10 MΩ or more