The storage system supports iSCSI connections to hosts. For details about configuring iSCSI host connections, see the Provisioning Guide.
Cable specifications for iSCSI optical interface
|
Cable type |
Interface |
Cable mode name |
Nominal |
||
|---|---|---|---|---|---|
|
Cable |
Connector |
||||
|
One side |
Other side |
||||
| LC-LC cable | Optical | Equivalent to DXLC-2P-PC-xxM-GC50, 125-2SR (OMx) |
50, 125 mm Multimode Wavelength: 850 nm |
LC connector | LC connector |
The following figure shows the connector used for optical interfaces.
- LC connector type
- Connector type LC duplex receptacle connector
- Interval 6.25 mm flat type, two rows
Cable specifications for 10 Gbps iSCSI copper interface
|
Cable type |
Maximum cable connection length |
Data transfer |
Transmission band |
Cable |
Connector |
|---|---|---|---|---|---|
|
Category 5e or 6a LAN cable |
100 m |
1 Gbps |
1000BASE-T |
STP ( use an STP cable that suppresses radio noise) |
RJ-45 |
|
Category 6a LAN cable |
50 m |
10 Gbps |
10GBASE-T |
STP ( use an STP cable that suppresses radio noise) |
RJ-45 |
