Step 2: Cable a management console

Virtual Storage Platform G130 (with SVP) Installation Guide

Version
88-08-0x
88-07-0x
88-06-0x
Audience
anonymous
Part Number
MK-97G130001-00

Because your storage system is factory-installed in a rack, the LAN 3 and LAN 4 port connections to the storage system controllers have already been made, and the power cable is already connected to a power distribution unit (PDU). However, you must make the LAN 1 and LAN 2 port connections described in the following table using customer-supplied Ethernet cables.
Note: All four LAN ports on the SVP are 1-GbE interfaces.


SVP LAN port Description
1 Do not connect a cable to the LAN 1 port at this time. You will connect to this port after you complete the Initial Startup wizard.
2 Connect the LAN 2 port to a Windows-based management console.
3 The LAN 3 port is already connected to the user LAN port on controller 1.
4 The LAN 4 port is already connected to the user LAN port on controller 2.