Changing the default password

Virtual Storage Platform G130 (without SVP) Installation Guide

Version
88-08-0x
88-07-0x
88-06-0x
Audience
anonymous
Part Number
MK-97G130000-00

To prevent unauthorized access to your storage system, change the default password.

  1. On your management console PC or laptop, open a web browser and enter the following IP address: 192.168.0.16
  2. Enter the default user name maintenance and the default password raid-maintenance, and then press the Enter key to log in to Hitachi Storage Advisor Embedded.


    If the login window does not appear, check whether the browser is configured to allow pop-ups. If pop-ups are allowed, make sure the management console IP address is set to 192.168.0.18 and the subnet mask is set to 25.255.255.0. If the IP address and subnet mask are correct and pop-ups are allowed, but the login window does not appear, contact customer support.
  3. In the top-right corner, click the gear icon, and then select User Administration.


  4. Click Support Personnel Group.


  5. On the Users tab, select the maintenance user check box if it is not already selected, and then click Edit.


  6. Type the new case-sensitive password for the maintenance user in New Password and Re-enter Password. For security, each typed password character is masked with a dot.
    Important: This password is required for storage system maintenance and for running the Initial Setup wizard. Record the new password for the maintenance user and keep it in a safe location.


  7. Click Finish, and then click OK, Apply, and Close.

Run the Initial Setup wizard.