The anti-tilt bracket for the Hitachi Universal V3 Rack must be anchored to a rigid floor capable of holding a minimum of 79 kg (154 lbs).
To install the anti-tilt bracket, use the following tools and components.
- T25 screwdriver
- Customer-supplied M10 or 3/8-inch screw capable of holding a minumum 79 kg (154 lbs)
-
Adjust the four retractable feet so the rack is level with the floor.
-
Attach two anti-tilt brackets to the feet on the back of the rack.
-
Using a minimum size of an M10 or 3/8-inch screw, fasten the bracket to the
floor.