| Number | Item | Description |
|---|---|---|
| 1 | STATUS | LED Off: Battery is uninstalled, installed
improperly or BKMF firmware is replaced (in case of a configuration
with no battery installed, the LEDs for BKMF-10 and BKMF-20 go out).
Green On: Battery is fully charged. Green Blinking: Battery is charged or discharged. Red On: BKMF has an error. Red Blinking: BKMF can be removed. A failure occurred in the battery or preventive maintenance replacement of the batteries is possible. |
| 2 | LAN-RST | This is a switch for GUM reset. If GUM reboot fails, reset GUM forcibly from the hardware. |
| 3 | CTL ALM | Red On: The controller board is ready to be removed
(when the maintenance work requiring insertion and removal of the
controller board is performed). A failure is detected in the
controller board (when the maintenance work mentioned above is not
performed). Red Blinking: A failure is detected in the controller board, cache memory, or cache flash memory (CFM). Amber On: Indicates that the LAN RESET switch is pressed. |
| 4 | BACKUP STS | Green On : Indicates that power
outage has occurred or power restoration is in progress after power
outage.
|
| 5 | ALARM | Red On: Cache Flash Memories are removable. |
| Number | Item | Description |
|---|---|---|
| 1 | ACT/LINK LED | Amber: Link status/data transfer status. |
| 2 | SPEED LED | On: Link speed = 1 Gbps. Off: Link speed = 10 Mbps/100 Mbps. |
| 3 | LAN ALARM LED | Red: The removal of the LAN Board is possible. |