Disabling HSTS

System Administrator Guide for Virtual Storage Platform E Series

Version
93-07-0x
Audience
anonymous
Part Number
MK-97HM85028-18

To disable HSTS, use the following procedure:

  1. Open a command prompt with administrator permissions on the SVP.
  2. Move the current directory to the folder in which the setting tool is located, and then execute the following command:
    cd /d C:\Mapp\wk\Supervisor\MappIniSet
    MappHstsDisable.bat
    
    Note: C:\Mapp: indicates the installation directory of storage management software and SVP software. If you specified an installation directory other than C:\Mapp, replace C:\Mapp with the specified installation directory.
  3. When "Press any key to continue ..." appears in the window, press the Enter key.
  4. To verify that HSTS is disabled, execute the following command:
    MappHstsState.bat
    Note:

    If "hsts=off" appears, HSTS is disabled. Press the Enter key. If "hsts=on" appears, HSTS is not disabled. Press the Enter key, and then go back to step 2.

    If the message indicating that the specified file could not be found appears, the HSTS settings failed. Press the Enter key, and then go back to step 2.

  5. Close the command prompt window.