The following figure shows an example of a Ports report. The Ports report includes several more columns of information that are described below but not shown here. 
The following table describes the items in a ports report.
| Item | Description |
|---|---|
| CHB | Name of the channel board |
| Type | Package type of the channel board |
| Port Location | Name of the port on the channel board |
| iSCSI Virtual Port Mode | Mode of the iSCSI virtual port |
| TCP Port Number | Port number to use for a socket (decimal) |
| Internal WWN / Internal iSCSI Name | Port WWN (16-digit hexadecimal) or iSCSI name of the port |
| Fabric | One of the Fibre topology settings indicating the setting status of the Fabric switch |
| Connection Type | Fibre topology setting:
|
| IPv4 : IP Address | IPv4 address of the port Output example: 192.168.0.100 |
| IPv4 : Subnet Mask | IPv4 subnet mask of the port Output example: 255.255.255.0 |
| IPv4 : Default Gateway | IPv4 default gateway of the port Output example: 255.255.255.0 |
| IPv6 : Mode | IPv6 settings of the port (enabled or disabled) |
| IPv6 : Link Local Address | IPv6 link local address of the port (16-digit hexadecimal) |
| IPv6 : Global Address | IPv6 global address of the port. Output example: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (hexadecimal) |
| IPv6 : Global Address 2 | IPv6 global address 2 of the port. Output example: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (hexadecimal) |
| IPv6 : Assigned Default Gateway | Assigned IPv6 default gateway |
| Selective ACK | Selective ACK mode (enabled or disabled) |
| Ethernet MTU Size (Byte) | MTU settings (binary) Output example: 1,500 |
| Keep Alive Timer | iSCSI keep alive timer (0 to 64,800) (sec) |
| VLAN : Tagging Mode | Tagging mode of VLAN (enabled or disabled) |
| VLAN : ID | Number of VLAN set to the port (1 to 4,094) |
| CHAP User Name | User name for the CHAP authentication |
| iSNS Server : Mode | iSNS mode settings (on or off) |
| iSNS Server : IP Address | IP address of the iSNS server (30 to 65,535) |
| iSNS Server : TCP Port Number | Number of the TCP port used in iSNS (binary) |
| Address (Loop ID) | Fibre port address and Loop ID of the port |
| Port Security | Security of the port
|
| Speed | Data transfer speed of the port |
| SFP Data Transfer Rate | Maximum transfer rate of SFP which the mounted package supports. Output example: 25G, 32G A hyphen (-) is displayed when the port type is 10iSCSI2c(CHB). |
|
T10 PI Mode |
Indicates whether the T10 PI mode can be applied to the port.
|
| Resource Group Name | Name of the resource group to which the port belongs |
| Resource Group ID | ID of the resource group to which the port belongs (0 to 1023) |
| Number of Hosts | Number of hosts registered to the port |
| Number of LUNs | Number of LU paths defined to the port |
| Number of LDEVs | Number of logical volumes that can be accessed through the port |
| Number of PGs | Number of parity groups having the logical volumes that can be accessed through the port |
| Number of DKBs | Number of disk boards controlling the parity group that contains the logical volumes that can be accessed through the port |
| Mode | Operation mode of the Fibre Channel port:
This item is displayed only for VSP E1090. |