This window appears when you click Change on the SNMP tab of the Set Up Alert Notifications window if the SNMP protocol version is SNMP v3.
|
Item |
Description |
|---|---|
| User Name | Enter the name of the user permitted to execute GET REQUEST, GETNEXT REQUEST, and GETBULK REQUEST. You can enter up to 32 alphanumeric characters, excluding the following symbols: \ , / ; : * ? " < > | & % ^ Do not enter space characters at the beginning or the end of the value. Note: If you use a user name that has already been specified for
Sending Trap Setting or
Request Authentication Setting, specify the same settings for the following options that were specified for that name. Otherwise, SNMP traps might not be sent correctly.
If User Name is displayed in gray and no values can be entered, delete the user you want to change, and then retry adding a user. Alternatively, disable SNMP Agent, and then re-enable SNMP Agent by using the Set Up Alert Notifications window. For more information, see the SNMP Agent User Guide. |
| Authentication |
Select whether to perform authentication.
Authentication and encryption information is displayed only if authentication is enabled. |
| Authentication - Protocol |
If authentication is enabled, select the authentication method.
|
| Authentication - Change Password | Select to display the
Password field and change the password.
If you are enabling authentication, this selection cannot be cleared. |
| Authentication - Password | If authentication is enabled, enter a password. The password must be 8 to 64 alphanumeric characters, excluding the following symbols:
\ , / ; : * ? " < > | & % ^ Do not enter space characters at the beginning or the end of the value. |
| Authentication - Re-enter Password | Re-enter the same password. |
| Encryption |
Select whether to perform encryption.
Encryption information is displayed only if encryption is enabled. |
| Encryption - Protocol |
If encryption is enabled, select the encryption method.
|
| Encryption - Change Key | Select to display the
Key field and change the key.
If you are enabling authentication, this selection cannot be cleared. |
| Encryption - Key | If encryption is enabled, enter a key. The key must be 8 to 64 alphanumeric characters, excluding the following symbols:
\ , / ; : * ? " < > | & % ^ Do not enter space characters at the beginning or the end of the value. |
| Encryption - Re-enter Key | Re-enter the same key. |