Using Maintenance Utility window

Storage System

-

Set Up System Information

Maintenance

Set Up System Info

-

NAS Module Status > Reset ^*

Maintenance

Reset Hypervisor

Reset Hypervisor NW

Reset NASFW

NAS Module Status > Edit Unified Hypervisor Maintenance Mode^*

Maintenance

Edit Hypervisor Mode

Chassis

Install > Drive Box

Install > Channel Board Box

Maintenance

Install

Remove > Drive Box

Remove > Channel Board Box

Maintenance

Remove

Locate LED > Turn on

Maintenance

Turn On Locate LEDs

Locate LED > Turn off

Maintenance

Turn Off Locate LEDs

Air Filter > Reset Duration of Use for Air Filter

Maintenance

Reset DurationOfUse

Air Filter > Edit Replacing Notice for Air Filter

Maintenance

Edit ReplacingNotice

Drives

Install

Maintenance

Install

Remove

Maintenance

Check Remove

Remove

Block

Maintenance

Block

Stop Copy

Maintenance

Stop Copy

* This operation menu is displayed when NAS modules are installed.

Controller Chassis

CTLs

Replace (Type Change) > Cache Memory - CTLn^{2, 3}

Maintenance

Block(Type Change)

Restore(Type Change)

Replace (Type Change) > CTLn^{1, 3}

Maintenance

Block(Type Change)

Restore(Type Change)

Install > Cache Memory - CTLn³

Maintenance

Block

Restore

Install > Shared Memory

Maintenance

Install

Remove > Cache Memory - CTLn³

Maintenance

Block(Remove)

Restore(Remove)

Remove > Shared Memory

Maintenance

Remove

BKMFs / BKMs^{4, 6}

Block (BKM)

Maintenance

Block

CFMs

Replace

Maintenance

Block

Restore

CHBs

Replace

Maintenance

Block

Restore

Install > Installed position

Maintenance

Install

Remove > Installed position

Maintenance

Remove

Changing SFP type by clicking SFP Status

Maintenance

Change SFP Type

PECBs ²

Replace

Maintenance

Block

Restore

DKBs ²

Replace

Maintenance

Block

Restore

Replace (Type Change)

Maintenance

Block(Type Change)

Restore

Install > Installed position

Maintenance

Install

Remove > Installed position

Maintenance

Remove

LANBs ²

Reset HUB

Maintenance

Reset HUB

Channel Board Box²

CHBs

Replace

Maintenance

Block

Restore

Install > Installed position

Maintenance

Install

Remove > Installed position

Maintenance

Remove

SWPKs

Replace

Maintenance

Block

Restore

PCPs

Replace

Maintenance

Block

Restore

Drive Box

Drives

Install

Maintenance

Install

Remove

Maintenance

Check Remove

Remove

Block

Maintenance

Block

Stop Copy

Maintenance

Stop Copy

ENCs

Replace

Maintenance

Block

Restore

Notes:

1. This tab or operation is available for VSP E590 and VSP E790.
2. This tab or operation is available for VSP E990 and VSP E1090.
3. "n" of CTRn can be 1 or 2.
4. BKMF is the part name of VSP E990 and VSP E1090. BKM is the part name of VSP E590 and VSP E790.
5. This item is not displayed for the models and firmware versions that do not support the expansion drive box.

6. For VSP E1090, the following operations are available:

   Operation: Replace (ACLF), Function Name: Maintenance, Operation Name: Block, Restore

   Operation: Replace (Type Change), Function Name: Maintenance, Operation Name: Block (Type Change), Restore (Type Change)

Firmware

-

Update

Maintenance

Update Firmware

Administration

-

UserAccount Information > Backup

Maintenance

UserAccount Backup

UserAccount Information > Restore

Maintenance

UserAccount Restore

User Group

Create User

Maintenance

Create User

User

Create

Maintenance

Create User

Edit

Maintenance

Edit User

Delete

Maintenance

Delete Users

Alert Notifications

-

Set Up

Maintenance

Set Up Alert

Licenses

-

Install

Maintenance

License Key Install

Enable

Maintenance

Enable Licenses

Disable

Maintenance

Disable Licenses

Remove

Maintenance

License Key Remove

Network Settings

-

Set Up Network Settings

Maintenance

Set Up Network Set

Set Up Network Permissions

Maintenance

Set Up Network Perm

Cloud Connection Settings

-

Set Up Cloud Connection Setting

Maintenance

Set Up Cloud Connector

Clear Cloud Connection Settings

Maintenance

Set Up Cloud Connector

Date & Time

-

Set Up

Maintenance

Set Up Date & Time

Audit Log Settings

-

Set Up Syslog Server

AuditLog

Set Up Syslog Serv

Send Test Message to Syslog Server

AuditLog

Send Test Message

Initial Setup Wizard

-

Maintenance

Set Up System Info

Set Up Date & Time

Set Up Network Set

Power Management

Power on Storage System

Maintenance

Power On Storage

Power off Storage System

Maintenance

Power Off Storage

Edit UPS Mode

Maintenance

Edit UPS Mode

System Management

Change Password

Maintenance

Edit User

Edit Login Message

Maintenance

Edit Login Message

Select Cipher Suite

Maintenance

Select Cipher Suite

Update Certificate Files

Maintenance

Update Cert Files

Select Login Window¹

Maintenance

Select Login Window²

Edit System Parameters

Maintenance

Edit System Param

Force Release System Lock

Maintenance

Force Rls SysLock

Reboot GUM

Maintenance

Reboot GUM

Install NAS Unified Firmware³

Maintenance

Install NAS Unified Firmware

Remove NAS Unified Firmware³

Maintenance

Remove NAS Unified Firmware

Boot System Safe Mode

Maintenance

Boot System SafeMode

Notes:

1. This operation menu is displayed when you log in to Maintenance Utility by specifying the CTL IP address on the web browser if NAS modules are installed.
2. A login selection window is displayed by specifying the CTL IP address on the web browser if NAS modules are installed. This audit log is also output when you specify a window for default login on the login selection window.
3. This operation menu is displayed when NAS modules are installed.

Clicking on the upper right of the window

Maintenance

Force Rls SysLock