[UVM] Add External Volumes

Audit Log User Guide for VSP E Series

Version
93-07-0x
Audience
anonymous
Part Number
MK-97HM85024-18

Detailed Information

Item

Description

Vendor

The name of the vendor of the external storage system that the mapped external volume exists

Product

The product name of the external storage system that the mapped external volume exists

Serial

The serial number the external storage system that the mapped external volume exists

VolumeID1

The volume properties of the mapped external volume

VolumeID2

The device ID of the mapped external volume

Device

The device name that the mapped external volume notifies to the host

Capa(blocks)

The capacity of the mapped external volume indicated by blocks

ExGroup

The number of the external volume group and the reference number assigned to the external volume of the mapped external volume. The number on the left of a dash (-) is the external volume number and the number on the right of the dash (-) is the reference number of the group.

PathGroup

The path group number of the mapped external volume

CLPR

The CLPR ID of the mapped external volume

Emulation

Not output because this item is not used.

Cache

The cache mode of the mapped external volume

Enable: Enabled, Disable: Disabled

Inflow

The inflow control setting of the cache of the mapped external volume.

Enable: Enabled, Disable: Disabled

MP Unit ID

MP Unit ID specified for the external volume

When an MP Unit ID is specified automatically, "Auto" is output.

LoadBalanceMode

The load balance mode of the mapped external volume

Normal Round-robin, Extended Round-robin, or Disable will appear.

ALUA Permitted

The ALUA permitted of the mapped external volume

Enable: Enabled, Disable: Disabled

Data Direct Mapping

Indicates the setting status of Data Direct Mapping

Enable: Data Direct Mapping is enabled.

Disable: Data Direct Mapping is disabled.

Result

The result of the operation

Normal end: Normal end,

Error(xxxx-yyyyy): Abnormal end

where xxxx: Part code, yyyyy: Error code

Port

The port name of the local storage system

WWN

For connection through the fibre channel port, the WWN of the target port on the external storage system is indicated.

For connection through the iSCSI port, a hyphen (-) is output.

IP Address

For connection through the iSCSI port, the IP address of the iSCSI port on the external storage system is indicated.

For connection through the fibre channel port, a hyphen (-) is output.

iSCSI Target Name

For connection through the iSCSI port, the iSCSI target name on the external storage system is indicated.

For connection through the fibre channel port, a hyphen (-) is output.

LUN

The LUN of the external volume

Num. of Paths

The number of mapping path (Port-WWN-LUN) configured

PathResult

The result of attempting to create an external path.

If the path is created normally, the audit log includes the following:

PathResult: Normal end

If the path is not created, the audit log includes this:

PathResult: Error(xxxx-yyyyy): Abnormal end

where xxxx is the Part code and yyyyy is the Error code

LDKC:CU:LDEV

The LDKC number, CU, and LDEV number of the LDEVs in the mapped external volume. The number on the left of the colon is an LDKC number, the number between the colons is a CU number, and the number on the right of the colon is an LDEV number

LDEVCapa(blocks)

The capacity of LDEVs in the mapped external volumes indicated by blocks

SSID

Not output because this item is not used.

LDEV MP Unit ID

MP Unit ID specified for the LDEV.

When an MP Unit ID is specified automatically, "Auto" is output.

LDEVResult

The result of attempting to create an external path.

If the LDEV is created normally, the audit log includes the following:

LDEVResult: Normal end

If the LDEV is not created, the audit log includes this:

LDEVResult: Error(xxxx-yyyyy): Abnormal end

where xxxx is the Part code and yyyyy is the Error code

Num. of LDEVs

The number of LDEVs in the mapped external volumes

Num. of Volumes

The number of mapped external volumes

Example

RMI AP,Task Name,[UVM],Add External Volumes,,Normal end,
Seq.=xxxxxxxxxx
+{Vendor,Product,Serial,VolumeID1,VolumeID2,Device,
Capa(blocks),ExGroup,PathGroup,CLPR,Emulation,Cache,Inflow,
MP Unit ID,LoadBalanceMode,ALUA Permitted,Data Direct Mapping,
Result}={HITACHI,9500V,28528,0001,
0000000000000000000000000000000000000000000000000000000000000000,
DF600F,4294967296,E1-1,1,0,,Enable,Disable,Auto,
Extended Round-robin,Enable,Enable,Normal end}
++{Port,WWN,IP Address,iSCSI Target Name,LUN,PathResult}
=[{1A,50560E8000C3E211,-,-,1,Normal end},
{2A,-,192.168.0.136,
iqn.1994-04.jp.co.hitachi.h8m.t.00001.2b000,1,Normal end},
{3A,-,FE80:0:0:0:0:0:0:1,
iqn.1994-04.jp.co.hitachi.h8m.t.00001.3b000,1,Normal end},
{4A,-,0:0:0:0:0:FFFF:192.168.0.137,
iqn.1994-04.jp.co.hitachi.h8m.t.00001.4b000,1,Normal end}],
Num. of Paths=4
++{LDKC:CU:LDEV,LDEVCapa(blocks),SSID,LDEV MP Unit ID,LDEVResult}
=[{0x00:0x00:0x00,96000,,Auto,Normal end},
{0x00:0x00:0x01,96000,,Auto,Normal end}],Num. of LDEVs=2
+{Vendor,Product,Serial,VolumeID1,VolumeID2,Device,
Capa(blocks),ExGroup,PathGroup,CLPR,Emulation,Cache,Inflow,
MP Unit ID,LoadBalanceMode,ALUA Permitted,Data Direct Mapping,
Result}={HITACHI,9500V,28528,0001,
0000000000000000000000000000000000000000000000000000000000000000,
DF600F,4294967296,E1-1,1,0,,Enable,Disable,Auto,
Extended Round-robin,Enable,Disable,Normal end}
++{Port,WWN,IP Address,iSCSI Target Name,LUN,PathResult}
=[{1A,50560E8000C3E211,-,-,2,Normal end},
{2A,-,192.168.0.136,
iqn.1994-04.jp.co.hitachi.h8m.t.00001.2b000,2,Normal end},
{3A,-,FE80:0:0:0:0:0:0:1,
iqn.1994-04.jp.co.hitachi.h8m.t.00001.3b000,2,Normal end},
{4A,-,0:0:0:0:0:FFFF:192.168.0.137,
iqn.1994-04.jp.co.hitachi.h8m.t.00001.4b000,2,Normal end}],
Num. of Paths=4
++{LDKC:CU:LDEV,LDEVCapa(blocks),SSID,LDEV MP Unit ID,LDEVResult}
=[{0x00:0x01:0x00,4294967296,,Auto,Normal end}],Num. of LDEVs=1
+Num. of Volumes=2