Detailed Information 1
|
Item |
Description |
|---|---|
|
Copy Type |
The copy type of this operation TC: TrueCopy |
|
P-VOL(Port-G-ID-LUN) |
The port number, host group number, and LUN of the primary volume of a pair that uses a volume connected to the host using Fibre Channel or iSCSI |
|
S-VOL(Port-G-ID-LUN) |
The port number, host group number, and LUN of the secondary volume of a pair that uses a volume connected to the host using Fibre Channel or iSCSI |
|
Fence Level |
Configured fence level (conditions where the local storage system rejects write operations to the primary volume) Never: Can write to the primary volume even the pair is split. Data: Cannot write to the primary volume when update copying fails. Status: Cannot write to the primary volume, only when the storage system of the primary site cannot change the pair status of the secondary volume to PSUE. |
|
Copy Pace |
The initial copy speed set (the number of tracks you can copy at a time) |
|
Priority |
The priority of resynchronizing operation set (scheduling order) |
|
VOL(LDKC:CU:LDEV) |
The LDKC number, CU number, and LDEV number of the volume (on the local storage system) of a pair that uses a volume connected to the host using NVMe over FC |
|
PairVOL(LDEV) |
The LDEV number of the volume (on the remote storage system) of a pair that uses a volume connected to the host using NVMe over FC |
|
Result |
The result of the operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end where xxxx: Part code, yyyyy: Error code |
|
Num. of Pairs |
The number of resynchronized pairs |
Detailed Information 2
|
Item |
Description |
|---|---|
|
Copy Type |
The copy type of this operation UR: Universal Replicator |
|
P-VOL(Port-G-ID-LUN) |
The port number, host group number, and LUN of the primary data volume of a pair that uses a volume connected to the host using Fibre Channel or iSCSI |
|
S-VOL(Port-G-ID-LUN) |
The port number, host group number, and LUN of the secondary data volume of a pair that uses a volume connected to the host using Fibre Channel or iSCSI |
|
MirrorID |
The mirror ID |
|
S/N |
The serial number of the RCU |
|
CTRLID |
The controller ID of the RCU 7: VSP G1000/G1500 and VSP F1500, 8: VSP 5000 series, 18: VSP E series, VSP G130, G/F350, G/F370, G/F700, G/F900, VSP G200, G400, G600, G800, and VSP F400, F600, F800, 19: HUS VM |
|
Priority |
The priority of resynchronizing operation set (scheduling order) |
|
CTG |
The consistency group ID |
|
Range |
The applicable range of resynchronization Mirror: All the pairs are resync that exist in the same mirror as the pair. LU: Only the pair is resync. |
|
M-JNL |
The master journal number |
|
R-JNL |
The restore journal number |
|
Error Level |
Range of the pair split at failure occurrence Mirror: When a pair fails, all the pairs are split that exist in the same mirror as the pair. LU: When a pair fails, only the pair is split. |
|
Resync Mode |
Type of the pair resynchronization operation Normal: normal resync, Delta: delta resync, Return to standby: return to standby status |
|
P-VOL(LDKC:CU:LDEV) |
The LDKC number, CU number, and LDEV number of the primary data volume of a pair that uses a volume connected to the host using NVMe over FC |
|
S-VOL(LDKC:CU:LDEV) |
The LDKC number, CU number, and LDEV number of the secondary data volume of a pair that uses a volume connected to the host using NVMe over FC |
|
Result |
The result of the operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end where xxxx: Part code, yyyyy: Error code |
|
Num. of Requests |
The number of resynchronized mirrors when Range is Mirror The number of resynchronized pairs when Range is LU |
Detailed Information 3
|
Item |
Description |
|---|---|
|
Copy Type |
The copy type of this operation GAD: global-active device |
|
P-VOL(Port-G-ID-LUN) |
The port number, host group number, and LUN of the primary volume |
|
S-VOL(Port-G-ID-LUN) |
The port number, host group number, and LUN of the secondary volume |
|
S/N_P |
The serial number of the local storage system |
|
S/N_S |
The serial number of the remote storage system |
|
Type |
The volume type of the volume on the local storage system P-VOL: Primary volume, S-VOL: Secondary volume |
|
Path Gr.ID |
Path group ID used in a global-active device pair |
|
Controller ID |
The controller ID of the remote storage system 7: VSP G1000/G1500 and VSP F1500, 18: VSP E series, VSP G130, G/F350, G/F370, G/F700, G/F900, VSP G200, G400, G600, G800, and VSP F400, F600, F800, 19: HUS VM |
|
SSID_P |
The SSID of the primary volume |
|
SSID_S |
The SSID of the secondary volume |
|
Copy Pace |
The setting of the initial copy speed (the number of tracks that can be copied at a time) |
|
Quorum Disk ID |
The quorum disk ID used by global-active device |
|
MirrorID |
The mirror ID |
|
Swap |
Indicates whether the attributes of the primary and secondary volumes are swapped. No: Not swapped, Yes: Swapped |
|
Range |
The applicable range of resynchronization Volume: Only this volume, Group: All volumes in the consistency group to which this volume belongs |
|
CTG |
The consistency group ID A hyphen (-) is displayed when the volume does not belong to a consistency group. |
|
Result |
The result of the operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end where xxxx: Part code, yyyyy: Error code |
|
Num. of Requests |
The number of requests to resynchronize pairs |
Example 1: Copy type is TC
RMI AP,,[Remote Replication],Resync Pairs,,Normal end,Seq.=xxxxxxxxxx +Copy Type=TC,{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),Fence Level, Copy Pace,Priority,VOL(LDKC:CU:LDEV),PairVOL(LDEV),Result} =[{1A-0x00-0,1B-0x00-0,Never,15,256,-,-,Normal end}, {1A-0x00-1,1B-0x00-1,Never,15,256,-,-,Normal end},(Snip)-(Snip)], Num. of Pairs=xx
Example 2: Copy type is UR
RMI AP,,[Remote Replication],Resync Pairs,,Normal end,Seq.=xxxxxxxxxx +Copy Type=UR +{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),MirrorID,S/N,CTRLID,Priority, CTG,Range,M-JNL,R-JNL,Error Level,Resync Mode, P-VOL(LDKC:CU:LDEV),S-VOL(LDKC:CU:LDEV),Result} =[{4C-0x00-0,4A-0x00-0,0x00,467676,18,32,0x000,LU,0x001,0x001,Mirror, Normal,-,-,Normal end}, {4C-0x00-1,4A-0x00-1,0x00,467676,18,32,0x000,LU,0x001,0x001,Mirror, Normal,-,-,Normal end}],Num. of Requests=2
Example 3: Copy type is GAD
RMI AP,,[Remote Replication],Resync Pairs,,Normal end,Seq.=xxxxxxxxxx
+Copy Type=GAD,{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),
S/N_P,S/N_S,Type,Path Gr.ID,Controller ID,SSID_P,SSID_S,
Copy Pace,Quorum Disk ID,MirrorID,Swap,Range,CTG,Result}=
-[{1A-0x00-0,1B-0x01-1,411111,422222,P-VOL,0x00,18,0x0004,0x0004,15,
0x00,1,Yes,Group,0x000,Normal end},(Snip)-(Snip)],Num. of Requests=xx