Detailed Information
|
Item |
Description |
|---|---|
|
Syslog Transfer Protocol |
The type of the syslog transfer protocol (TLS/RFC5424 or UDP/RFC3164). |
|
Syslog Server |
The syslog server to be set. Primary: Primary syslog server, Secondary: Secondary syslog server |
|
Server Enable |
Indicates whether the syslog server is enabled. Enable: The syslog server is enabled. Disable: The syslog server is disabled. |
|
Type |
The type of the IP address of the syslog server (Identifier(Domain), IPv4, or IPv6). |
|
Name |
The host name or IP address of the syslog server to which SIMs are sent. |
|
Port Number |
The port number used to communicate with the syslog server. |
|
Client Certificate File Name |
The name of the client certificate file. |
|
Root Certificate File Name |
The name of the root certificate file. |
|
Location Identification Name |
The location identification name entered during the setting operation. |
|
Retry |
Indicates whether to retry if transfer to syslog servers fails. Enable: Transfer is retried. Disable: Transfer is not retried. |
|
Retry Interval |
The retry interval in seconds if transfer to syslog servers fails |
Example
GUM AP,,[Maintenance],Set Up Syslog,,Normal end,Seq.=xxxxxxxxxx
+Syslog Transfer Protocol=TLS/RFC5452,
{Syslog Server,Server Enable,Type,Name,Port Number,
Client Certificate File Name,Root Certificate File Name,
Location Identification Name,Retry,Retry Interval}
=[{Primary,Enable,IPv4,xxxxx,65535,YYYYY,ZZZZ,ZZZZ,Enable,555},
{Secondary,Enable,IPv4,xxxxx,65535,YYYYY,ZZZZ,ZZZZ,Enable,555}]