[Maintenance] Set Up SNMP

Audit Log User Guide for VSP E Series

Version
93-07-0x
Audience
anonymous
Part Number
MK-97HM85024-18

Detailed Information 1

Item

Description

SNMP Agent

The setting status of the SNMP agent.

Enable: SNMP trap is notified.

Disable: SNMP trap is not notified.

SNMP Version

The SNMP protocol version

Send Trap to Community Name

The community name to which SNMP traps are sent.

IP Address

The IP address added to the community to which SNMP traps are sent.

Request Authentication Setting Community Name

The community name set to the request authentication setting.

Requests Permitted IP Address

The IP address added to the community to permit requests.

Storage System Name

The storage system name entered during the setting operation.

Contact

The contact information entered during the setting operation.

Location

The installation location of the storage system entered during the setting operation.

Detailed Information 2

Item

Description

SNMP Agent

The setting status of the SNMP agent.

Enable: SNMP trap is notified.

Disable: SNMP trap is not notified.

SNMP Version

The SNMP protocol version

Send Trap to IP Address

The IP address to which traps are sent.

User Name

The user name set to the SNMP trap destination.

Authentication Mode

The authentication mode status set to the SNMP trap destination.

Enable: Authentication mode is enabled.

Disable: Authentication mode is disabled.

Authentication Protocol

The authentication protocol set to the SNMP trap destination: SHA or MD5

Encryption Mode

The encryption mode status set to the SNMP trap destination.

Enable: Encryption mode is enabled.

Disable: Encryption mode is disabled.

Encryption Protocol

The encryption protocol set to the SNMP trap destination: AES or DES

Request Authentication Setting User Name

The user name set to the request authentication setting.

Authentication Mode

The authentication mode status of the user set to the request authentication.

Enable: Authentication mode is enabled.

Disable: Authentication mode is disabled.

Authentication Protocol

The authentication protocol of the user set to the request authentication: SHA or MD5

Encryption Mode

The encryption mode status of the user set to the request authentication.

Enable: Encryption mode is enabled.

Disable: Encryption mode is disabled.

Encryption Protocol

The encryption protocol of the user set to the request authentication: AES or DES

Storage System Name

The storage system name entered during the setting operation.

Contact

The contact information entered during the setting operation.

Location

The installation location of the storage system entered during the setting operation.

Example 1: SNMP v1 or SNMP v2c

GUM AP,,[Maintenance],Set Up SNMP,,Normal end,Seq.=xxxxxxxxxx
+SNMP Agent=Enable,SNMP Version=v1,
{Send Trap to Community Name,IP Address}
=[{AAA, 192.168.0.1,192.168.0.2},{BBB,192.168.1.1,192.168.1.2}],
{Request Authentication Setting Community Name, 
Requests Permitted IP Address}=[{AAA,192.168.0.10,192.168.0.12},
{BBB, 192.168.1.10,192.168.1.12}],Storage System Name=xxx,
Contact=xxx,Location=xxx

Example 2: SNMP v3

GUM AP,,[Maintenance],Set Up SNMP,,Normal end,Seq.=xxxxxxxxxx
+SNMP Agent=Enable,SNMP Version=v3,
{Send Trap to IP Address,User Name,Authentication Mode,
Authentication Protocol,Encryption Mode,Encryption Protocol}
=[{192.168.0.1,AAA,Enable,SHA,Enable,AES},
{192.168.0.1,AAA,Enable,SHA,Enable,AES},
{192.168.0.1,AAA,Enable,SHA,Enable,AES}],
-{Request Authentication Setting User Name,Authentication Mode,
Authentication Protocol,Encryption Mode,Encryption Protocol}
=[{BBB,Enable,SHA,Enable,AES},{CCC,Enable,SHA,Enable,AES},
{DDD,Enable,SHA,Enable,AES}],Storage System Name=xxx,Contact=xxx,
Location=xxx