Detailed Information 1
|
Item |
Description |
|---|---|
|
Notification Alert |
The destination of the alert. All: All the hosts, Host Report: Only the hosts to which SIMs are set to be reported |
|
Email Notice |
Indicates whether notification by email is enabled. Enable: The notification is enabled. Disable: The notification is disabled. |
|
Attribute |
The attribute (To, Cc or Bcc) of the destination email address. |
|
Email Address |
The destination email addresses. A hyphen (-) is displayed if notification by email is disabled. |
|
Email Address (From) |
The sender email address. A hyphen (-) is displayed if notification by email is disabled. |
|
Email Address (Reply To) |
The email address to reply. A hyphen (-) is displayed if notification by email is disabled. |
|
Description to Notify |
The additional information at the top of the body of the error notification message by email. A hyphen (-) is displayed if notification by email is disabled or the Description to Notify is not set. |
|
Mail Server Type |
The type of Mail Server Name (Identifier(Domain), IPv4 or IPv6). |
|
Mail Server Name |
The host name or the IP address of the mail server. |
|
SMTP Authentication |
Indicates whether the SMTP authentication is enabled. Enable: The authentication is enabled. Disable: The authentication is disabled. |
|
SMTP Authentication Account |
The SMTP authentication account. A hyphen (-) is displayed if the SMTP authentication is disabled. |
|
Syslog Transfer Protocol |
The type of the syslog transfer protocol (TLS/RFC5424 or UDP/RFC3164). |
|
Syslog Server |
The syslog server to be set. Primary: Primary syslog server, Secondary: Secondary syslog server |
|
Server Enable |
Indicates whether the syslog server is enabled. Enable: The syslog server is enabled. Disable: The syslog server is disabled. |
|
Type |
The type of the IP address of the syslog server (IPv4 or IPv6). A hyphen (-) is displayed if the syslog server is disabled. |
|
Name |
The IP address of the syslog server to which SIMs are sent. A hyphen (-) is displayed if the syslog server is disabled. |
|
Port Number |
The port number used to communicate with the syslog server. A hyphen (-) is displayed if the syslog server is disabled. |
|
Client Certificate File Name |
The name of the client certificate file. A hyphen (-) is displayed, if the syslog servers is disabled or if UDP/RFC3164 is used as a transfer protocol. |
|
Root Certificate File Name |
The name of the root certificate file. A hyphen (-) is displayed, if the syslog servers is disabled or if UDP/RFC3164 is used as a transfer protocol. |
|
Location Identification Name |
The location identification name entered during the setting operation. |
|
Retry |
Indicates whether to retry if transferring to syslog servers failed. Enable: Transfer is retried. Disable: Transfer is not retried. A hyphen (-) is displayed if UDP/RFC3164 is used as a transfer protocol. |
|
Retry Interval |
The interval of the retries of transferring. A hyphen (-) is displayed, if the setting of the retry is disabled or if UDP/RFC3164 is used as a transfer protocol. |
|
SNMP Agent |
The setting status of the SNMP agent. Enable: SNMP trap is notified. Disable: SNMP trap is not notified. |
|
SNMP Version |
The SNMP protocol version |
|
Send Trap to Community Name |
The community name to which SNMP traps are sent. A hyphen (-) is displayed if the SNMP trap is not notified. |
|
IP Address |
The IP address added to the community to which SNMP traps are sent. A hyphen (-) is displayed if the SNMP trap is not notified. |
|
Request Authentication Setting Community Name |
The community name added to the request authentication setting. A hyphen (-) is displayed if this item is not set in the request authentication setting. |
|
Requests Permitted IP Address |
The IP address added to the community to permit requests. A hyphen (-) is displayed if this item is not set in the request authentication setting. |
|
Storage System Name |
The storage system name entered during the setting operation. A hyphen (-) is displayed if the SNMP trap is not notified. |
|
Contact |
The contact information entered during the setting operation. A hyphen (-) is displayed if the SNMP trap is not notified. |
|
Location |
The installation location of the storage system entered during the setting operation. A hyphen (-) is displayed if the SNMP trap is not notified. |
Detailed Information 2
|
Item |
Description |
|---|---|
|
Notification Alert |
The destination of the alert. All: All the hosts, Host Report: Only the hosts to which SIMs are set to be reported |
|
Email Notice |
Indicates whether notification by email is enabled. Enable: The notification is enabled. Disable: The notification is disabled. |
|
Attribute |
The attribute (To, Cc or Bcc) of the destination email address. |
|
Email Address |
The destination email addresses. A hyphen (-) is displayed if notification by email is disabled. |
|
Email Address (From) |
The sender email address. A hyphen (-) is displayed if notification by email is disabled. |
|
Email Address (Reply To) |
The email address to reply. A hyphen (-) is displayed if notification by email is disabled. |
|
Description to Notify |
The additional information at the top of the body of the error notification message by email. A hyphen (-) is displayed if notification by email is disabled or the Description to Notify is not set. |
|
Mail Server Type |
The type of Mail Server Name (Identifier(Domain), IPv4 or IPv6). |
|
Mail Server Name |
The host name or the IP address of the mail server. |
|
SMTP Authentication |
Indicates whether the SMTP authentication is enabled. Enable: The authentication is enabled. Disable: The authentication is disabled. |
|
SMTP Authentication Account |
The SMTP authentication account. A hyphen (-) is displayed if the SMTP authentication is disabled. |
|
Syslog Transfer Protocol |
The type of the syslog transfer protocol (TLS/RFC5424 or UDP/RFC3164). |
|
Syslog Server |
The syslog server to be set. Primary: Primary syslog server, Secondary: Secondary syslog server |
|
Server Enable |
Indicates whether the syslog server is enabled. Enable: The syslog server is enabled. Disable: The syslog server is disabled. |
|
Type |
The type of the IP address of the syslog server (Identifier(Domain), IPv4, or IPv6). A hyphen (-) is displayed if the syslog server is disabled. |
|
Name |
The host name or IP address of the syslog server to which SIMs are sent. A hyphen (-) is displayed if the syslog server is disabled. |
|
Port Number |
The port number used to communicate with the syslog server. A hyphen (-) is displayed if the syslog server is disabled. |
|
Client Certificate File Name |
The name of the client certificate file. A hyphen (-) is displayed, if the syslog servers is disabled or if UDP/RFC3164 is used as a transfer protocol. |
|
Root Certificate File Name |
The name of the root certificate file. A hyphen (-) is displayed, if the syslog servers is disabled or if UDP/RFC3164 is used as a transfer protocol. |
|
Location Identification Name |
The location identification name entered during the setting operation. |
|
Retry |
Indicates whether to retry if transferring to syslog servers failed. Enable: Transfer is retried. Disable: Transfer is not retried. A hyphen (-) is displayed if UDP/RFC3164 is used as a transfer protocol. |
|
Retry Interval |
The interval of the retries of transferring. A hyphen (-) is displayed, if the setting of the retry is disabled or if UDP/RFC3164 is used as a transfer protocol. |
|
SNMP Agent |
The setting status of the SNMP agent. Enable: SNMP trap is notified. Disable: SNMP trap is not notified. |
|
SNMP Version |
The SNMP protocol version |
|
Send Trap to IP Address |
The IP address to which traps are sent. A hyphen (-) is displayed if the SNMP trap is not notified. |
|
User Name |
The user name set to the SNMP trap destination. A hyphen (-) is displayed if the SNMP trap is not notified. |
|
Authentication Mode |
The authentication mode status set to the SNMP trap destination. Enable: Authentication mode is enabled. Disable: Authentication mode is disabled. A hyphen (-) is displayed if the SNMP trap is not notified. |
|
Authentication Protocol |
The authentication protocol set to the SNMP trap destination: SHA or MD5 A hyphen (-) is displayed if SNMP traps are not notified or if the authentication mode of the SNMP trap destination is disabled. |
|
Encryption Mode |
The encryption mode status set to the SNMP trap destination. Enable: Encryption mode is enabled. Disable: Encryption mode is disabled. A hyphen (-) is displayed if the SNMP trap is not notified. |
|
Encryption Protocol |
The encryption protocol set to the SNMP trap destination: AES or DES A hyphen (-) is displayed if SNMP traps are not notified or if the encryption mode of the SNMP trap destination is disabled. |
|
Request Authentication Setting User Name |
The user name set to the request authentication setting. A hyphen (-) is displayed if the request authentication is not set. |
|
Authentication Mode |
The authentication mode status of the user set to the request authentication. Enable: Authentication mode is enabled. Disable: Authentication mode is disabled. A hyphen (-) is displayed if this item is not set in the request authentication setting. |
|
Authentication Protocol |
The authentication protocol of the user set to the request authentication: SHA or MD5 A hyphen (-) is displayed if this item is not set or if the authentication mode is disabled in the request authentication setting. |
|
Encryption Mode |
The encryption mode status of the user set to the request authentication. Enable: Encryption mode is enabled. Disable: Encryption mode is disabled. A hyphen (-) is displayed if this item is not set in the request authentication setting. |
|
Encryption Protocol |
The encryption protocol of the user set to the request authentication: AES or DES A hyphen (-) is displayed if this item is not set or if the encryption mode is disabled in the request authentication setting. |
|
Storage System Name |
The storage system name entered during the setting operation. A hyphen (-) is displayed if the SNMP trap is not notified. |
|
Contact |
The contact information entered during the setting operation. A hyphen (-) is displayed if the SNMP trap is not notified. |
|
Location |
The installation location of the storage system entered during the setting operation. A hyphen (-) is displayed if the SNMP trap is not notified. |
Detailed Information 3
|
Item |
Description |
|---|---|
|
Notification Alert |
The destination of the alert. All: All the hosts, Host Report: Only the hosts to which SIMs are set to be reported |
|
Email Notice |
Indicates whether notification by email is enabled. Enable: The notification is enabled. Disable: The notification is disabled. |
|
Attribute |
The attribute (To, Cc or Bcc) of the destination email address. |
|
Email Address |
The destination email addresses. A hyphen (-) is displayed if notification by email is disabled. |
|
Email Address (From) |
The sender email address. A hyphen (-) is displayed if notification by email is disabled. |
|
Email Address (Reply To) |
The email address to reply. A hyphen (-) is displayed if notification by email is disabled. |
|
Description to Notify |
The additional information at the top of the body of the error notification message by email. A hyphen (-) is displayed if notification by email is disabled or the Description to Notify is not set. |
|
Mail Server Type |
The type of Mail Server Name (Identifier(Domain), IPv4 or IPv6). |
|
Mail Server Name |
The host name or the IP address of the mail server. |
|
SMTP Authentication |
Indicates whether the SMTP authentication is enabled. Enable: The authentication is enabled. Disable: The authentication is disabled. |
|
SMTP Authentication Account |
The SMTP authentication account. A hyphen (-) is displayed if the SMTP authentication is disabled. |
|
Syslog Transfer Protocol |
The type of the syslog transfer protocol (TLS/RFC5424 or UDP/RFC3164). |
|
Syslog Server |
The syslog server to be set. Primary: Primary syslog server, Secondary: Secondary syslog server |
|
Server Enable |
Indicates whether the syslog server is enabled. Enable: The syslog server is enabled. Disable: The syslog server is disabled. |
|
Type |
The type of the IP address of the syslog server (Identifier(Domain), IPv4, or IPv6). A hyphen (-) is displayed if the syslog server is disabled. |
|
Name |
The host name or IP address of the syslog server to which SIMs are sent. A hyphen (-) is displayed if the syslog server is disabled. |
|
Port Number |
The port number used to communicate with the syslog server. A hyphen (-) is displayed if the syslog server is disabled. |
|
Client Certificate File Name |
The name of the client certificate file. A hyphen (-) is displayed, if the syslog servers is disabled or if UDP/RFC3164 is used as a transfer protocol. |
|
Root Certificate File Name |
The name of the root certificate file. A hyphen (-) is displayed, if the syslog servers is disabled or if UDP/RFC3164 is used as a transfer protocol. |
|
Location Identification Name |
The location identification name entered during the setting operation. |
|
Retry |
Indicates whether to retry if transferring to syslog servers failed. Enable: Transfer is retried. Disable: Transfer is not retried. A hyphen (-) is displayed if UDP/RFC3164 is used as a transfer protocol. |
|
Retry Interval |
The interval of the retries of transferring A hyphen (-) is displayed, if the setting of the retry is disabled or if UDP/RFC3164 is used as a transfer protocol. |
|
SNMP Community Name |
The name of the community of the SNMP trap destination. A hyphen (-) is displayed if the SNMP trap is not notified. |
|
IP Address |
The IP address added to the community to which SNMP traps are sent. A hyphen (-) is displayed if the SNMP trap is not notified. |
|
SNMP Agent |
The setting status of the SNMP agent. Enable: SNMP trap is notified. Disable: SNMP trap is not notified. |
|
SNMP Manager |
The IP address of the SNMP manager. A hyphen (-) is displayed if the SNMP trap is not notified. |
|
Storage System Name |
The storage system name entered during the setting operation. A hyphen (-) is displayed if the SNMP trap is not notified. |
|
Contact |
The contact information entered during the setting operation. A hyphen (-) is displayed if the SNMP trap is not notified. |
|
Location |
The installation location of the storage system entered during the setting operation. A hyphen (-) is displayed if the SNMP trap is not notified. |
Example 1: SNMP v1 or SNMP v2c
GUM,,[Maintenance],Set Up Alert,,Normal end,Seq.=xxxxxxxxxx
+Notification Alert=Host Report,Email Notice=Enable,
{Attribute,Email Address}
=[{To,aaa@example.com},{Cc,bbb@example.com}],
Email Address (From)=yyy@example.com,
Email Address (Reply To)=zzz@example.com,
Description to Notify=XXXXXXXXXXXX,Mail Server Type=IPv4,
Mail Server Name=XXXXXXXXX,SMTP Authentication=Enable,
SMTP Authentication Account=XXXX,
Syslog Transfer Protocol=TLS/RFC5452,
{Syslog Server,Server Enable,Type,Name,Port Number,
Client Certificate File Name,Root Certificate File Name,
Location Identification Name,Retry,Retry Interval}
=[{Primary,Enable,IPv4,xxxxx,65535,YYYYY,ZZZZ,ZZZZ,Disable,555},
{Secondary,Enable,IPv4,xxxxx,65535,YYYYY,ZZZZ,ZZZZ,Disable,555}],
SNMP Agent=Enable,SNMP Version=v1
+Send Trap to Community Name=AAA
++IP Address=[192.168.0.1,192.168.0.2]
+Send Trap to Community Name=BBB
++IP Address=[192.168.1.1,192.168.1.2]
+Request Authentication Setting Community Name=AAA
++Requests Permitted IP Address=[192.168.0.10,192.168.0.12]
+Request Authentication Setting Community Name=BBB
++Requests Permitted IP Address=[192.168.1.10,192.168.1.12],
Storage System Name=xxx,Contact=xxx,Location=xxx
Example 2: SNMP v3
GUM,,[Maintenance],Set Up Alert,,Normal end,Seq.=xxxxxxxxxx
+Notification Alert=Host Report,Email Notice=Enable,
{Attribute,Email Address}
=[{To,aaa@example.com},{Cc,bbb@example.com}],
Email Address (From)=yyy@example.com,
Email Address (Reply To)=zzz@example.com,
Description to Notify=XXXXXXXXXXXX,Mail Server Type=IPv4,
Mail Server Name=XXXXXXXXX,SMTP Authentication=Enable,
SMTP Authentication Account=XXXX,
Syslog Transfer Protocol=TLS/RFC5452,
{Syslog Server,Server Enable,Type,Name,Port Number,
Client Certificate File Name,Root Certificate File Name,
Location Identification Name,Retry,Retry Interval}
=[{Primary,Enable,IPv4,xxxxx,65535,YYYYY,ZZZZ,ZZZZ,Disable,555},
{Secondary,Enable,IPv4,xxxxx,65535,YYYYY,ZZZZ,ZZZZ,Disable,555}],
SNMP Agent=Enable,SNMP Version=v3,
{Send Trap to IP Address,User Name,Authentication Mode,
Authentication Protocol,Encryption Mode,Encryption Protocol}
=[{192.168.0.1,AAA,Enable,SHA,Enable,AES},
{192.168.0.1,AAA,Enable,SHA,Enable,AES},
{192.168.0.1,AAA,Enable,SHA,Enable,AES}],
{Request Authentication Setting User Name,Authentication Mode,
Authentication Protocol,Encryption Mode,Encryption Protocol}
=[{BBB,Enable,SHA,Enable,AES},{CCC,Enable,SHA,Enable,AES},
{DDD,Enable,SHA,Enable,AES}],
Storage System Name=xxx,Contact=xxx,Location=xxx
Example 3: Alert notification setting from an application except Maintenance Utility
GUM,,[Maintenance],Set Up Alert,,Normal end,Seq.=xxxxxxxxxx
+Notification Alert=Host Report,Email Notice=Enable,
{Attribute,Email Address}
=[{To,aaa@example.com},{Cc,bbb@example.com}],
Email Address (From)=yyy@example.com,
Email Address (Reply To)=zzz@example.com,
Description to Notify=XXXXXXXXXXXX,Mail Server Type=IPv4,
Mail Server Name=XXXXXXXXX,SMTP Authentication=Enable,
SMTP Authentication Account=XXXX,
Syslog Transfer Protocol=TLS/RFC5452,
{Syslog Server,Server Enable,Type,Name,Port Number,
Client Certificate File Name,Root Certificate File Name,
Location Identification Name,Retry,Retry Interval}
=[{Primary,Enable,IPv4,xxxxx,65535,YYYYY,ZZZZ,ZZZZ,Disable,555},
{Secondary,Enable,IPv4,xxxxx,65535,YYYYY,ZZZZ,ZZZZ,Disable,555}],
{SNMP Community Name,IP Address}
=[{AAA,192.168.0.1},{AAA,192.168.0.1},{AAA,192.168.0.1}],
SNMP Agent=Enable,SNMP Manager=[192.168.0.1,xxx],
Storage System Name=xxx,Contact=xxx,Location=xxx