Pairresync(LocalCopy)

Audit Log User Guide for VSP E Series

Version
93-07-0x
Audience
anonymous
Part Number
MK-97HM85024-18

Example

Out-of-band,,[Config Command],,,Accept,Seq.=xxxxxxxxxx
+Command=Pairresync(LocalCopy)
++Copy Kind=Local
++P-VOL(Port-LUN-LDEV)=1A-2047-0x1A,S-VOL(Port-LUN-LDEV)=1B-3-0x3B,
MCU S/N=412345,RCU S/N=412345,
Resync Type=Reverse,Virtual Storage Machine S/N=423456,
Copy Pace(TRK)=1,Pair Target Range=Device,
CTG ID=100,Split Mode=Normal,Device Option=Enable

Detailed Information

Item

Description

Command

The command name

Copy Kind

The local copy

Local is output as the fixed value.

P-VOL(Port-LUN-LDEV)*1

The port number, the LU number, and the LDEV number of the primary volume

The port number and the LU number show the expanded LU of Command Control Interface

The LU number is the absolute LUN*2 of Command Control Interface

S-VOL(Port-LUN-LDEV)*1

The port number, the LU number, and the LDEV number of the secondary volume

The port number and the LU number show the expanded LU of Command Control Interface

The LU number is the absolute LUN*2 of Command Control Interface

MCU S/N*1

The serial number of the local storage system

RCU S/N*1

The same value as that of MCU S/N is output.

Resync Type

Indicates the direction of resynchronizing a pair

Normal: Normal direction (Primary volume to secondary volume)

Reverse: Reverse direction (Secondary volume to primary volume)

Virtual Storage Machine S/N

The serial number of the virtual storage machine

No value is output when a virtual storage machine is not specified.

Copy Pace(TRK)

The track size for copy

Pair Target Range

Specifies the range of pairs to be resynchronized

Device: Specifies by the device

Group: Specifies by the consistency group

CTG ID

The consistency group ID

0 (zero) is output if the consistency group option (-m grp) is not specified.

Split Mode

The resynchronization mode when pairs are resynchronized

Normal: The pair is resynchronized normally

Quick: The pair is resynchronized quickly

If it is not specified at the command option, a hyphen (-) is output.

Device Option

Indicates whether the volume name defined in the configuration definition file is used

Enable: Used, Disable: Not used

*1 When a virtual storage machine is specified, the value of the virtual storage machine is output.

*2 For more information about the absolute LUN, see Command Control Interface Installation and Configuration Guide