Example
Out-of-band,,[Config Command],,,Accept,Seq.=xxxxxxxxxx
+Command=Add Parity Group
++PG=1-1,Drive Location={0-0,0-1,0-2,0-3,0-4,0-5,0-6,0-7}
++PG=1-2,Drive Location={1-0,1-1,1-2,1-3,1-4,1-5,1-6,1-7}
++PG=1-3,Drive Location={2-0,2-1,2-2,2-3,2-4,2-5,2-6,2-7}
++PG=1-4,Drive Location={3-0,3-1,3-2,3-3,3-4,3-5,3-6,3-7}
++Num. of PGs=4
++RAID Level=7D+1P,CLPR=1,Encryption=Disable,Copy Back=Disable,Accelerated Compression=Disable
Detailed Information
|
Item |
Description |
|---|---|
|
Command |
The command name |
|
PG |
The parity group number |
|
Drive Location |
The drive location |
|
PG |
The parity group number 2 This item is not displayed if the number of the parity groups are less than 2. |
|
Drive Location |
The drive location 2 This item is not displayed if the number of the parity groups are less than 2. |
|
PG |
The parity group number 3 This item is not displayed if the number of the parity groups are less than 3. |
|
Drive Location |
The drive location 3 This item is not displayed if the number of the parity groups are less than 3. |
|
PG |
The parity group number 4 This item is not displayed if the number of the parity groups are less than 4. |
|
Drive Location |
The drive location 4 This item is not displayed if the number of the parity groups are less than 4. |
|
Num. of PGs |
Number of the parity groups |
|
RAID Level |
The RAID level |
|
CLPR |
The CLPR ID |
|
Encryption |
Indicates whether the encryption is enabled or disabled. Enable: The setting is enabled. Disable: The setting is disabled. |
|
Copy Back |
Indicates whether the copy back mode is enabled or disabled. Enable: The setting is enabled. Disable: The setting is disabled. |
|
Accelerated Compression |
Indicates whether the accelerated compression is enabled or disabled. Disable is always output. |