Virtual Storage Platform E1090 Installation Guide

Version: 93-07-2x; 93-07-0x; 93-06-8x
Audience: anonymous
Part Number: MK-97HM85053-01

Installing your storage system
Step 1: Unpack the storage system
Step 2: Verify component location in the rack
Step 3: Install the controller into the rack
Step 4: Installing the drive boxes into the rack
Step 5: Cable the drive boxes
Step 6: Connect the storage system to power
Step 7: Cable the management console
Step 8: Power on the storage system
Step 9: Perform the initial setup
Preparing the storage system
Changing the password
Running the Initial Setup wizard
Configure syslog and SNMP notifications
Step 10: Make host connections
Connecting Fibre Channel ports to hosts
Connecting iSCSI ports to hosts
Step 11: Register your storage system with Hitachi Vantara Support
Step 12: Install Hitachi Remote Ops monitoring system
Where to go from here
Configure the storage system for the first time
Read the release notes
Read the latest technical bulletins
Support

Back to home page