Detailed Information 1
|
Item |
Description |
|---|---|
|
SNMP Agent |
The setting status of the SNMP agent. Enable: SNMP trap is notified. Disable: SNMP trap is not notified. |
|
SNMP Version |
The SNMP protocol version |
|
Send Trap to Community Name |
The community name to which SNMP traps are sent. |
|
IP Address |
The IP address added to the community to which SNMP traps are sent. |
|
Request Authentication Setting Community Name |
The community name set to the request authentication setting. |
|
Requests Permitted IP Address |
The IP address added to the community to permit requests. |
|
Storage System Name |
The storage system name entered during the setting operation. |
|
Contact |
The contact information entered during the setting operation. |
|
Location |
The installation location of the storage system entered during the setting operation. |
Detailed Information 2
|
Item |
Description |
|---|---|
|
SNMP Agent |
The setting status of the SNMP agent. Enable: SNMP trap is notified. Disable: SNMP trap is not notified. |
|
SNMP Version |
The SNMP protocol version |
|
Send Trap to IP Address |
The IP address to which traps are sent. |
|
User Name |
The user name set to the SNMP trap destination. |
|
Authentication Mode |
The authentication mode status set to the SNMP trap destination. Enable: Authentication mode is enabled. Disable: Authentication mode is disabled. |
|
Authentication Protocol |
The authentication protocol set to the SNMP trap destination: SHA or MD5 |
|
Encryption Mode |
The encryption mode status set to the SNMP trap destination. Enable: Encryption mode is enabled. Disable: Encryption mode is disabled. |
|
Encryption Protocol |
The encryption protocol set to the SNMP trap destination: AES or DES |
|
Request Authentication Setting User Name |
The user name set to the request authentication setting. |
|
Authentication Mode |
The authentication mode status of the user set to the request authentication. Enable: Authentication mode is enabled. Disable: Authentication mode is disabled. |
|
Authentication Protocol |
The authentication protocol of the user set to the request authentication: SHA or MD5 |
|
Encryption Mode |
The encryption mode status of the user set to the request authentication. Enable: Encryption mode is enabled. Disable: Encryption mode is disabled. |
|
Encryption Protocol |
The encryption protocol of the user set to the request authentication: AES or DES |
|
Storage System Name |
The storage system name entered during the setting operation. |
|
Contact |
The contact information entered during the setting operation. |
|
Location |
The installation location of the storage system entered during the setting operation. |
Example 1: SNMP v1 or SNMP v2c
GUM AP,,[Maintenance],Set Up SNMP,,Normal end,Seq.=xxxxxxxxxx
+SNMP Agent=Enable,SNMP Version=v1,
{Send Trap to Community Name,IP Address}
=[{AAA, 192.168.0.1,192.168.0.2},{BBB,192.168.1.1,192.168.1.2}],
{Request Authentication Setting Community Name,
Requests Permitted IP Address}=[{AAA,192.168.0.10,192.168.0.12},
{BBB, 192.168.1.10,192.168.1.12}],Storage System Name=xxx,
Contact=xxx,Location=xxx
Example 2: SNMP v3
GUM AP,,[Maintenance],Set Up SNMP,,Normal end,Seq.=xxxxxxxxxx
+SNMP Agent=Enable,SNMP Version=v3,
{Send Trap to IP Address,User Name,Authentication Mode,
Authentication Protocol,Encryption Mode,Encryption Protocol}
=[{192.168.0.1,AAA,Enable,SHA,Enable,AES},
{192.168.0.1,AAA,Enable,SHA,Enable,AES},
{192.168.0.1,AAA,Enable,SHA,Enable,AES}],
-{Request Authentication Setting User Name,Authentication Mode,
Authentication Protocol,Encryption Mode,Encryption Protocol}
=[{BBB,Enable,SHA,Enable,AES},{CCC,Enable,SHA,Enable,AES},
{DDD,Enable,SHA,Enable,AES}],Storage System Name=xxx,Contact=xxx,
Location=xxx