[Maintenance] Set Up Alert

Audit Log User Guide for VSP E Series

Version
93-06-8x
Audience
anonymous
Part Number
MK-97HM85024-17

Detailed Information 1

Item

Description

Notification Alert

The destination of the alert.

All: All the hosts, Host Report: Only the hosts to which SIMs are set to be reported

Email Notice

Indicates whether notification by email is enabled.

Enable: The notification is enabled.

Disable: The notification is disabled.

Attribute

The attribute (To, Cc or Bcc) of the destination email address.

Email Address

The destination email addresses.

A hyphen (-) is displayed if notification by email is disabled.

Email Address (From)

The sender email address.

A hyphen (-) is displayed if notification by email is disabled.

Email Address (Reply To)

The email address to reply.

A hyphen (-) is displayed if notification by email is disabled.

Description to Notify

The additional information at the top of the body of the error notification message by email.

A hyphen (-) is displayed if notification by email is disabled or the Description to Notify is not set.

Mail Server Type

The type of Mail Server Name (Identifier(Domain), IPv4 or IPv6).

Mail Server Name

The host name or the IP address of the mail server.

SMTP Authentication

Indicates whether the SMTP authentication is enabled.

Enable: The authentication is enabled.

Disable: The authentication is disabled.

SMTP Authentication Account

The SMTP authentication account.

A hyphen (-) is displayed if the SMTP authentication is disabled.

Syslog Transfer Protocol

The type of the syslog transfer protocol (TLS/RFC5424 or UDP/RFC3164).

Syslog Server

The syslog server to be set.

Primary: Primary syslog server, Secondary: Secondary syslog server

Server Enable

Indicates whether the syslog server is enabled.

Enable: The syslog server is enabled.

Disable: The syslog server is disabled.

Type

The type of the IP address of the syslog server (IPv4 or IPv6).

A hyphen (-) is displayed if the syslog server is disabled.

Name

The IP address of the syslog server to which SIMs are sent.

A hyphen (-) is displayed if the syslog server is disabled.

Port Number

The port number used to communicate with the syslog server.

A hyphen (-) is displayed if the syslog server is disabled.

Client Certificate File Name

The name of the client certificate file.

A hyphen (-) is displayed, if the syslog servers is disabled or if UDP/RFC3164 is used as a transfer protocol.

Root Certificate File Name

The name of the root certificate file.

A hyphen (-) is displayed, if the syslog servers is disabled or if UDP/RFC3164 is used as a transfer protocol.

Location Identification Name

The location identification name entered during the setting operation.

Retry

Indicates whether to retry if transferring to syslog servers failed.

Enable: Transfer is retried.

Disable: Transfer is not retried.

A hyphen (-) is displayed if UDP/RFC3164 is used as a transfer protocol.

Retry Interval

The interval of the retries of transferring.

A hyphen (-) is displayed, if the setting of the retry is disabled or if UDP/RFC3164 is used as a transfer protocol.

SNMP Agent

The setting status of the SNMP agent.

Enable: SNMP trap is notified.

Disable: SNMP trap is not notified.

SNMP Version

The SNMP protocol version

Send Trap to Community Name

The community name to which SNMP traps are sent.

A hyphen (-) is displayed if the SNMP trap is not notified.

IP Address

The IP address added to the community to which SNMP traps are sent.

A hyphen (-) is displayed if the SNMP trap is not notified.

Request Authentication Setting Community Name

The community name added to the request authentication setting.

A hyphen (-) is displayed if this item is not set in the request authentication setting.

Requests Permitted IP Address

The IP address added to the community to permit requests.

A hyphen (-) is displayed if this item is not set in the request authentication setting.

Storage System Name

The storage system name entered during the setting operation.

A hyphen (-) is displayed if the SNMP trap is not notified.

Contact

The contact information entered during the setting operation.

A hyphen (-) is displayed if the SNMP trap is not notified.

Location

The installation location of the storage system entered during the setting operation.

A hyphen (-) is displayed if the SNMP trap is not notified.

Detailed Information 2

Item

Description

Notification Alert

The destination of the alert.

All: All the hosts, Host Report: Only the hosts to which SIMs are set to be reported

Email Notice

Indicates whether notification by email is enabled.

Enable: The notification is enabled.

Disable: The notification is disabled.

Attribute

The attribute (To, Cc or Bcc) of the destination email address.

Email Address

The destination email addresses.

A hyphen (-) is displayed if notification by email is disabled.

Email Address (From)

The sender email address.

A hyphen (-) is displayed if notification by email is disabled.

Email Address (Reply To)

The email address to reply.

A hyphen (-) is displayed if notification by email is disabled.

Description to Notify

The additional information at the top of the body of the error notification message by email.

A hyphen (-) is displayed if notification by email is disabled or the Description to Notify is not set.

Mail Server Type

The type of Mail Server Name (Identifier(Domain), IPv4 or IPv6).

Mail Server Name

The host name or the IP address of the mail server.

SMTP Authentication

Indicates whether the SMTP authentication is enabled.

Enable: The authentication is enabled.

Disable: The authentication is disabled.

SMTP Authentication Account

The SMTP authentication account.

A hyphen (-) is displayed if the SMTP authentication is disabled.

Syslog Transfer Protocol

The type of the syslog transfer protocol (TLS/RFC5424 or UDP/RFC3164).

Syslog Server

The syslog server to be set.

Primary: Primary syslog server, Secondary: Secondary syslog server

Server Enable

Indicates whether the syslog server is enabled.

Enable: The syslog server is enabled.

Disable: The syslog server is disabled.

Type

The type of the IP address of the syslog server (Identifier(Domain), IPv4, or IPv6).

A hyphen (-) is displayed if the syslog server is disabled.

Name

The host name or IP address of the syslog server to which SIMs are sent.

A hyphen (-) is displayed if the syslog server is disabled.

Port Number

The port number used to communicate with the syslog server.

A hyphen (-) is displayed if the syslog server is disabled.

Client Certificate File Name

The name of the client certificate file.

A hyphen (-) is displayed, if the syslog servers is disabled or if UDP/RFC3164 is used as a transfer protocol.

Root Certificate File Name

The name of the root certificate file.

A hyphen (-) is displayed, if the syslog servers is disabled or if UDP/RFC3164 is used as a transfer protocol.

Location Identification Name

The location identification name entered during the setting operation.

Retry

Indicates whether to retry if transferring to syslog servers failed.

Enable: Transfer is retried.

Disable: Transfer is not retried.

A hyphen (-) is displayed if UDP/RFC3164 is used as a transfer protocol.

Retry Interval

The interval of the retries of transferring.

A hyphen (-) is displayed, if the setting of the retry is disabled or if UDP/RFC3164 is used as a transfer protocol.

SNMP Agent

The setting status of the SNMP agent.

Enable: SNMP trap is notified.

Disable: SNMP trap is not notified.

SNMP Version

The SNMP protocol version

Send Trap to IP Address

The IP address to which traps are sent.

A hyphen (-) is displayed if the SNMP trap is not notified.

User Name

The user name set to the SNMP trap destination.

A hyphen (-) is displayed if the SNMP trap is not notified.

Authentication Mode

The authentication mode status set to the SNMP trap destination.

Enable: Authentication mode is enabled.

Disable: Authentication mode is disabled.

A hyphen (-) is displayed if the SNMP trap is not notified.

Authentication Protocol

The authentication protocol set to the SNMP trap destination: SHA or MD5

A hyphen (-) is displayed if SNMP traps are not notified or if the authentication mode of the SNMP trap destination is disabled.

Encryption Mode

The encryption mode status set to the SNMP trap destination.

Enable: Encryption mode is enabled.

Disable: Encryption mode is disabled.

A hyphen (-) is displayed if the SNMP trap is not notified.

Encryption Protocol

The encryption protocol set to the SNMP trap destination: AES or DES

A hyphen (-) is displayed if SNMP traps are not notified or if the encryption mode of the SNMP trap destination is disabled.

Request Authentication Setting User Name

The user name set to the request authentication setting.

A hyphen (-) is displayed if the request authentication is not set.

Authentication Mode

The authentication mode status of the user set to the request authentication.

Enable: Authentication mode is enabled.

Disable: Authentication mode is disabled.

A hyphen (-) is displayed if this item is not set in the request authentication setting.

Authentication Protocol

The authentication protocol of the user set to the request authentication: SHA or MD5

A hyphen (-) is displayed if this item is not set or if the authentication mode is disabled in the request authentication setting.

Encryption Mode

The encryption mode status of the user set to the request authentication.

Enable: Encryption mode is enabled.

Disable: Encryption mode is disabled.

A hyphen (-) is displayed if this item is not set in the request authentication setting.

Encryption Protocol

The encryption protocol of the user set to the request authentication: AES or DES

A hyphen (-) is displayed if this item is not set or if the encryption mode is disabled in the request authentication setting.

Storage System Name

The storage system name entered during the setting operation.

A hyphen (-) is displayed if the SNMP trap is not notified.

Contact

The contact information entered during the setting operation.

A hyphen (-) is displayed if the SNMP trap is not notified.

Location

The installation location of the storage system entered during the setting operation.

A hyphen (-) is displayed if the SNMP trap is not notified.

Detailed Information 3

Item

Description

Notification Alert

The destination of the alert.

All: All the hosts, Host Report: Only the hosts to which SIMs are set to be reported

Email Notice

Indicates whether notification by email is enabled.

Enable: The notification is enabled.

Disable: The notification is disabled.

Attribute

The attribute (To, Cc or Bcc) of the destination email address.

Email Address

The destination email addresses.

A hyphen (-) is displayed if notification by email is disabled.

Email Address (From)

The sender email address.

A hyphen (-) is displayed if notification by email is disabled.

Email Address (Reply To)

The email address to reply.

A hyphen (-) is displayed if notification by email is disabled.

Description to Notify

The additional information at the top of the body of the error notification message by email.

A hyphen (-) is displayed if notification by email is disabled or the Description to Notify is not set.

Mail Server Type

The type of Mail Server Name (Identifier(Domain), IPv4 or IPv6).

Mail Server Name

The host name or the IP address of the mail server.

SMTP Authentication

Indicates whether the SMTP authentication is enabled.

Enable: The authentication is enabled.

Disable: The authentication is disabled.

SMTP Authentication Account

The SMTP authentication account.

A hyphen (-) is displayed if the SMTP authentication is disabled.

Syslog Transfer Protocol

The type of the syslog transfer protocol (TLS/RFC5424 or UDP/RFC3164).

Syslog Server

The syslog server to be set.

Primary: Primary syslog server, Secondary: Secondary syslog server

Server Enable

Indicates whether the syslog server is enabled.

Enable: The syslog server is enabled.

Disable: The syslog server is disabled.

Type

The type of the IP address of the syslog server (Identifier(Domain), IPv4, or IPv6).

A hyphen (-) is displayed if the syslog server is disabled.

Name

The host name or IP address of the syslog server to which SIMs are sent.

A hyphen (-) is displayed if the syslog server is disabled.

Port Number

The port number used to communicate with the syslog server.

A hyphen (-) is displayed if the syslog server is disabled.

Client Certificate File Name

The name of the client certificate file.

A hyphen (-) is displayed, if the syslog servers is disabled or if UDP/RFC3164 is used as a transfer protocol.

Root Certificate File Name

The name of the root certificate file.

A hyphen (-) is displayed, if the syslog servers is disabled or if UDP/RFC3164 is used as a transfer protocol.

Location Identification Name

The location identification name entered during the setting operation.

Retry

Indicates whether to retry if transferring to syslog servers failed.

Enable: Transfer is retried.

Disable: Transfer is not retried.

A hyphen (-) is displayed if UDP/RFC3164 is used as a transfer protocol.

Retry Interval

The interval of the retries of transferring

A hyphen (-) is displayed, if the setting of the retry is disabled or if UDP/RFC3164 is used as a transfer protocol.

SNMP Community Name

The name of the community of the SNMP trap destination.

A hyphen (-) is displayed if the SNMP trap is not notified.

IP Address

The IP address added to the community to which SNMP traps are sent.

A hyphen (-) is displayed if the SNMP trap is not notified.

SNMP Agent

The setting status of the SNMP agent.

Enable: SNMP trap is notified.

Disable: SNMP trap is not notified.

SNMP Manager

The IP address of the SNMP manager.

A hyphen (-) is displayed if the SNMP trap is not notified.

Storage System Name

The storage system name entered during the setting operation.

A hyphen (-) is displayed if the SNMP trap is not notified.

Contact

The contact information entered during the setting operation.

A hyphen (-) is displayed if the SNMP trap is not notified.

Location

The installation location of the storage system entered during the setting operation.

A hyphen (-) is displayed if the SNMP trap is not notified.

Example 1: SNMP v1 or SNMP v2c

GUM,,[Maintenance],Set Up Alert,,Normal end,Seq.=xxxxxxxxxx
+Notification Alert=Host Report,Email Notice=Enable,
{Attribute,Email Address}
=[{To,aaa@example.com},{Cc,bbb@example.com}],
Email Address (From)=yyy@example.com,
Email Address (Reply To)=zzz@example.com,
Description to Notify=XXXXXXXXXXXX,Mail Server Type=IPv4,
Mail Server Name=XXXXXXXXX,SMTP Authentication=Enable,
SMTP Authentication Account=XXXX,
Syslog Transfer Protocol=TLS/RFC5452,
{Syslog Server,Server Enable,Type,Name,Port Number,
Client Certificate File Name,Root Certificate File Name,
Location Identification Name,Retry,Retry Interval}
=[{Primary,Enable,IPv4,xxxxx,65535,YYYYY,ZZZZ,ZZZZ,Disable,555},
{Secondary,Enable,IPv4,xxxxx,65535,YYYYY,ZZZZ,ZZZZ,Disable,555}],
SNMP Agent=Enable,SNMP Version=v1
+Send Trap to Community Name=AAA
++IP Address=[192.168.0.1,192.168.0.2]
+Send Trap to Community Name=BBB
++IP Address=[192.168.1.1,192.168.1.2]
+Request Authentication Setting Community Name=AAA
++Requests Permitted IP Address=[192.168.0.10,192.168.0.12]
+Request Authentication Setting Community Name=BBB
++Requests Permitted IP Address=[192.168.1.10,192.168.1.12],
Storage System Name=xxx,Contact=xxx,Location=xxx

Example 2: SNMP v3

GUM,,[Maintenance],Set Up Alert,,Normal end,Seq.=xxxxxxxxxx
+Notification Alert=Host Report,Email Notice=Enable,
{Attribute,Email Address}
=[{To,aaa@example.com},{Cc,bbb@example.com}],
Email Address (From)=yyy@example.com,
Email Address (Reply To)=zzz@example.com,
Description to Notify=XXXXXXXXXXXX,Mail Server Type=IPv4,
Mail Server Name=XXXXXXXXX,SMTP Authentication=Enable,
SMTP Authentication Account=XXXX,
Syslog Transfer Protocol=TLS/RFC5452,
{Syslog Server,Server Enable,Type,Name,Port Number,
Client Certificate File Name,Root Certificate File Name,
Location Identification Name,Retry,Retry Interval}
=[{Primary,Enable,IPv4,xxxxx,65535,YYYYY,ZZZZ,ZZZZ,Disable,555},
{Secondary,Enable,IPv4,xxxxx,65535,YYYYY,ZZZZ,ZZZZ,Disable,555}],
SNMP Agent=Enable,SNMP Version=v3,
{Send Trap to IP Address,User Name,Authentication Mode,
Authentication Protocol,Encryption Mode,Encryption Protocol}
=[{192.168.0.1,AAA,Enable,SHA,Enable,AES},
{192.168.0.1,AAA,Enable,SHA,Enable,AES},
{192.168.0.1,AAA,Enable,SHA,Enable,AES}],
{Request Authentication Setting User Name,Authentication Mode,
Authentication Protocol,Encryption Mode,Encryption Protocol}
=[{BBB,Enable,SHA,Enable,AES},{CCC,Enable,SHA,Enable,AES},
{DDD,Enable,SHA,Enable,AES}],
Storage System Name=xxx,Contact=xxx,Location=xxx

Example 3: Alert notification setting from an application except Maintenance Utility

GUM,,[Maintenance],Set Up Alert,,Normal end,Seq.=xxxxxxxxxx
+Notification Alert=Host Report,Email Notice=Enable,
{Attribute,Email Address}
=[{To,aaa@example.com},{Cc,bbb@example.com}],
Email Address (From)=yyy@example.com,
Email Address (Reply To)=zzz@example.com,
Description to Notify=XXXXXXXXXXXX,Mail Server Type=IPv4,
Mail Server Name=XXXXXXXXX,SMTP Authentication=Enable,
SMTP Authentication Account=XXXX,
Syslog Transfer Protocol=TLS/RFC5452,
{Syslog Server,Server Enable,Type,Name,Port Number,
Client Certificate File Name,Root Certificate File Name,
Location Identification Name,Retry,Retry Interval}
=[{Primary,Enable,IPv4,xxxxx,65535,YYYYY,ZZZZ,ZZZZ,Disable,555},
{Secondary,Enable,IPv4,xxxxx,65535,YYYYY,ZZZZ,ZZZZ,Disable,555}],
{SNMP Community Name,IP Address}
=[{AAA,192.168.0.1},{AAA,192.168.0.1},{AAA,192.168.0.1}],
SNMP Agent=Enable,SNMP Manager=[192.168.0.1,xxx],
Storage System Name=xxx,Contact=xxx,Location=xxx