Example
Out-of-band,,[Config Command],,,Accept,Seq.=xxxxxxxxxx +Command=Pairresync(LocalCopy) ++Copy Kind=Local ++P-VOL(Port-LUN-LDEV)=1A-2047-0x1A,S-VOL(Port-LUN-LDEV)=1B-3-0x3B, MCU S/N=412345,RCU S/N=412345, Resync Type=Reverse,Virtual Storage Machine S/N=423456, Copy Pace(TRK)=1,Pair Target Range=Device, CTG ID=100,Split Mode=Normal,Device Option=Enable
Detailed Information
|
Item |
Description |
|---|---|
|
Command |
The command name |
|
Copy Kind |
The local copy Local is output as the fixed value. |
|
P-VOL(Port-LUN-LDEV)*1 |
The port number, the LU number, and the LDEV number of the primary volume The port number and the LU number show the expanded LU of Command Control Interface The LU number is the absolute LUN*2 of Command Control Interface |
|
S-VOL(Port-LUN-LDEV)*1 |
The port number, the LU number, and the LDEV number of the secondary volume The port number and the LU number show the expanded LU of Command Control Interface The LU number is the absolute LUN*2 of Command Control Interface |
|
MCU S/N*1 |
The serial number of the local storage system |
|
RCU S/N*1 |
The same value as that of MCU S/N is output. |
|
Resync Type |
Indicates the direction of resynchronizing a pair Normal: Normal direction (Primary volume to secondary volume) Reverse: Reverse direction (Secondary volume to primary volume) |
|
Virtual Storage Machine S/N |
The serial number of the virtual storage machine No value is output when a virtual storage machine is not specified. |
|
Copy Pace(TRK) |
The track size for copy |
|
Pair Target Range |
Specifies the range of pairs to be resynchronized Device: Specifies by the device Group: Specifies by the consistency group |
|
CTG ID |
The consistency group ID 0 (zero) is output if the consistency group option (-m grp) is not specified. |
|
Split Mode |
The resynchronization mode when pairs are resynchronized Normal: The pair is resynchronized normally Quick: The pair is resynchronized quickly If it is not specified at the command option, a hyphen (-) is output. |
|
Device Option |
Indicates whether the volume name defined in the configuration definition file is used Enable: Used, Disable: Not used |
|
*1 When a virtual storage machine is specified, the value of the virtual storage machine is output. *2 For more information about the absolute LUN, see Command Control Interface Installation and Configuration Guide |
|