Example
Out-of-band,,[Config Command],,,Accept,Seq.=xxxxxxxxxx
+Command=Paircreate(LocalCopy)
++Copy Kind=Local
++P-VOL(Port-LUN-LDEV)=1A-2047-0x1A,S-VOL(Port-LUN-LDEV)=1B-3-0x3B,
MCU S/N=412345,RCU S/N=412345,
Virtual Storage Machine S/N=423456,
Copy Pace(TRK)=1,Range=Group,CTG ID=100,
Split Mode=Normal,S-VOL Hidden Mode=Enable,Pool ID(TI)=10,
Device Option=Enable
Detailed Information
|
Item |
Description |
|---|---|
|
Command |
The command name |
|
Copy Kind |
The local copy Local is output as the fixed value. |
|
P-VOL(Port-LUN-LDEV)*1 |
The port number, the LU number, and the LDEV number of the primary volume The port number and the LU number show the expanded LU of Command Control Interface The LU number is the absolute LUN*2 of Command Control Interface |
|
S-VOL(Port-LUN-LDEV)*1 |
The port number, the LU number, and the LDEV number of the secondary volume The port number and the LU number show the expanded LU of Command Control Interface The LU number is the absolute LUN*2 of Command Control Interface |
|
MCU S/N*1 |
The serial number of the local storage system |
|
RCU S/N*1 |
The same value as that of MCU S/N is output. |
|
Virtual Storage Machine S/N |
The serial number of the virtual storage machine No value is output when a virtual storage machine is not specified. |
|
Copy Pace(TRK) |
The track size for copy |
|
Range |
Specifies a range of pairs to be created Device: Specifies by the device Group: Specifies by the consistency group |
|
CTG ID |
The consistency group ID 0 (zero) is output if the consistency group option (-m grp) is not specified. |
|
Split Mode |
The resynchronization mode when ShadowImage pairs are resynchronized Normal: The pair is resynchronized normally. Quick: The pair is resynchronized quickly. If it is not specified at the command option or the pair is other than ShadowImage one, a hyphen (-) is output. |
|
S-VOL Hidden Mode |
Indicates whether the secondary volume is hidden after a ShadowImage pair is created Enable: Hides the secondary volume Disable: Not hides the secondary volume Disable is output for pairs other than ShadowImage ones. |
|
Pool ID(TI) |
The pool ID of Thin Image pairs 0 (zero) is output for pairs other than Thin Image ones. |
|
Device Option |
Indicates whether the volume name defined in the configuration definition file is used Enable: Used, Disable: Not used |
|
*1When a virtual storage machine is specified, the value of the virtual storage machine is output. *2 For more information about the absolute LUN, see Command Control Interface Installation and Configuration Guide |
|