Add Snapshot

Audit Log User Guide for VSP E Series

Version

93-06-8x

Audience

anonymous

Part Number

MK-97HM85024-17

Example

Out-of-band,,[Config Command],,,Accept,Seq.=xxxxxxxxxx
+Command=Add Snapshot
++Snapshot Group=SSSSSSSS,Pool ID=A,
P-VOL(LDKC:CU:LDEV)=0x00:0xAA:0xBB,
S-VOL(LDKC:CU:LDEV)=0x00:0xCC:0xDD,
Virtual Storage Machine S/N=423456,
Range=Group,S-VOL Storage Machine S/N=412345,
S-VOL Actual Controller ID=18,Add Mode=Cascade
Add Mode Option=AutoSplit,S-VOL Create=No,S-VOL Nickname=,
Resource Group ID=1,S-VOL ID Range Start(LDKC:CU:LDEV)=0x00:0xAA:0xBB,
S-VOL ID Range End(LDKC:CU:LDEV)=0x00:0xCC:0xDD,MU=127,SLU=Enable

Detailed Information

Item	Description
Command	The command name
Snapshot Group	The name of a snapshot group
Pool ID	The pool ID of a pool to which a pair to be registered belongs
P-VOL(LDKC:CU:LDEV)	The LDEV ID of the primary volume of a pair to be registered When a virtual storage machine is specified, the volume number of the virtual storage machine is output.
S-VOL(LDKC:CU:LDEV)	The LDEV ID of the secondary volume of a pair to be registered No output when a secondary volume is not specified
Virtual Storage Machine S/N	The serial number of the virtual storage machine No output when a virtual storage machine is not specified
Range	The range for splitting pairs Volume: Only the pair is split. Group: All pairs in the group including the pair are split.
S-VOL Storage Machine S/N	The serial number of the actual storage system to which the secondary volume belongs
S-VOL Actual Controller ID	The controller ID of the actual storage system to which the secondary volume belongs 5: USP V/VM, 6: VSP, 7: VSP G1000/G1500 and VSP F1500, 18: VSP E series, VSP G130, G/F350, G/F370, G/F700, G/F900, VSP G200, G400, G600, G800, and VSP F400, F600, F800, 19: HUS VM
Add Mode	The mode of the pair to be registered Cascade: cascade configuration, Clone: cloned pair You can configure the cascade configuration, also when the "Clone" is specified.
Add Mode Option	Perform the cloned pair or the pair split operation automatically. AutoClone: Perform the cloned pair automatically AutoSplit: Perform the pair split operation None: Not perform automatically
S-VOL Create	Create the secondary volume automatically or not Yes: Create the secondary volume automatically No: Not create the secondary volume automatically
S-VOL Nickname	The name to be designated on the secondary volume The value is output only when S-VOL Create is Yes.
Resource Group ID	The resource group ID of the secondary volume No value is output when the Resource Group ID is not specified.
S-VOL ID Range Start(LDKC:CU:LDEV)	Indicates the start LDEV ID for searching the secondary volume to be automatically numbered. No value is output when the LDEV ID range of the secondary volume is not specified.
S-VOL ID Range End(LDKC:CU:LDEV)	Indicates the end LDEV ID for searching the secondary volume to be automatically numbered. No value is output when the LDEV ID range of the secondary volume is not specified.
MU	The MU number No value is output when the MU number is not specified.
SLU	Indicates whether the SLU attribute is specified for the snapshot data. Enable: The SLU attribute is specified. This item is output only when the SLU attribute is specified.