Example
Out-of-band,,[Config Command],,,Accept,Seq.=xxxxxxxxxx
+Command=Add LUN
++Port=1A,Host Group ID=0x1AA,LUN=2,
LDEV(LDKC:CU:LDEV)=0x00:0xAA:0xBB,
Virtual Storage Machine S/N=423456,Command Device=Enable
++Additional Port(Port,Host Group ID,LUN)
=[{1B,0x1AA,2},{1C,0x1AA,2}],Num. of Paths=2
Detailed Information
|
Item |
Description |
|---|---|
|
Command |
The command name |
|
Port |
The name of a port to which an LU is added When a virtual storage machine is specified, the port name of the virtual storage machine is output. |
|
Host Group ID |
The ID of a host group to which an LU is added |
|
LUN |
The LU number to be added "Auto" is output when auto is specified instead of the LU number. |
|
LDEV(LDKC:CU:LDEV) |
The LDEV ID of an LDEV to be set as an LU. |
|
Virtual Storage Machine S/N |
The serial number of the virtual storage machine No output when a virtual storage machine is not specified |
|
Command Device |
The setting status of the command device attribute Enable: Enabled, Disable: Disabled A hyphen (-) is output for the value when LUN is "Auto". |
|
Additional Port(Port,Host Group ID,LUN) |
The port name, the host group ID, and the LU number for the LU path to be added If it is not specified by the command option, the item itself is not output. "Auto" is output for the LUN of this item when LUN is "Auto". |
|
Num. of Paths |
The number of LU paths to be added If it is not specified by the command option, the item itself is not output. |