Example of using embedded CCI

Storage Advisor Embedded User Guide

Version
93-07-2x
88-08-12
Audience
anonymous
Part Number
MK-97HM85022-25
The following example shows how to change the threshold value of a pool using embedded CCI. In this example, the serial number of the storage system is 480002 and CTL 1 is used, so the command prompt is 480002-1:$.
  1. In the SSH client, specify the IP address of the controller and the connection port (20522) to connect to the GUM processor.

    The embedded CCI user session is created.

  2. Check the pool status:
    480002-1:$ raidcom get pool -key opt
  3. Change the threshold of the pool (pool ID = 6) to 70%:
    480002-1:$ raidcom modify pool -pool 6 -user_threshold 70
  4. Confirm that the threshold of the pool has changed to 70%:
    480002-1:$ raidcom get pool -key opt