raidcom modify drive

Storage Advisor Embedded User Guide

Version
93-07-2x
88-08-12
Audience
anonymous
Part Number
MK-97HM85022-25
Supported storage systems:
  • VSP G130, G/F350, G/F370, G/F700, G/F900

Configures spare drives or cancels the settings.

This command is executed asynchronously with the command input. Use the raidcom get command_status command to check if the command is completed.

Note: If a failure occurs in a processor on an MP blade or a controller, this command cannot be run even on an MP blade or a controller on which no failure occurs.

Syntax

raidcom modify drive -drive_location <drive location> -spare {enable|disable}

Options and parameters

-drive_location <drive location>

Specifies the drive location.

Example:

When the drive location is HDD00-01:

0-1

-spare {enable|disable}

Sets a spare drive or cancels the setting.

  • enable: Sets a drive as a spare drive.
  • disable: Cancels the spare drive setting.

Example

Setting a drive whose drive location is HDD00-01 as a spare drive.

# raidcom modify drive -drive_location 0-1 -spare enable