Access requirements for LUN Manager

Add LUN paths

When you specify host groups and open the Add LUN Paths window, the specified host groups must be assigned to the Storage Administrator group permitted to manage them.

When you specify LDEVs and open the Add LUN paths window, the specified LDEVs must be assigned to the Storage Administrator group permitted to manage them.

Delete LUN paths

When you specify a host group and open the Delete LUN Paths window, the specified host group must be assigned to the Storage Administrator group permitted to manage them.

When you specify LDEVs and open the Delete LUN Paths window, the specified LDEVs must be assigned to the Storage Administrator group permitted to manage them.

When selecting the Delete all defined LUN paths to above LDEVs check box, the host groups of all the alternate paths in the LDEV displayed on the Selected LUNs table must be assigned to the Storage Administrator group permitted to manage them.

Edit host groups

The specified host groups and ports must be assigned to the Storage Administrator group permitted to manage them.

Add hosts

The specified host groups must be assigned to the Storage Administrator group permitted to manage them.

Edit hosts

The specified host group must be assigned to the Storage Administrator group permitted to manage them.

When you select the Apply same settings to the HBA WWN of all ports check box, all the host groups where the specified HBA WWNs are registered must be assigned to the Storage Administrator group permitted to manage them.

Remove hosts

When you select the Remove hosts from all host groups containing the hosts in the storage system check box, all the host groups where the HBA WWNs displayed in the Selected Hosts table are registered must be assigned to the Storage Administrator group permitted to manage them.

Edit ports

The specified port must be assigned to the Storage Administrator group permitted to manage them.

Create alternative LUN paths

The specified host groups and all the LDEVs where the paths are set to the host groups must be assigned to the Storage Administrator group permitted to manage them.

Copy LUN paths

The specified host groups and the LDEVs where the paths are set must be assigned to the Storage Administrator group permitted to manage them.

Edit command devices

LDEVs where the specified paths are set must be assigned to the Storage Administrator group permitted to manage them.

Edit UUIDs

The specified LDEV must be assigned to the Storage Administrator group permitted to manage them.

Delete UUIDs

The specified LDEV must be assigned to the Storage Administrator group permitted to manage them.

Create host groups

When you open the Create Host Groups window by specifying host groups, the specified host groups must be assigned to the Storage Administrator group permitted to manage them.

Delete host groups

The specified host groups and all the LDEVs where the paths are set to the host groups must be assigned to the Storage Administrator group permitted to manage them.

Release Host-Reserved LUNs

LDEVs where the specified paths are set must be assigned to you.

Add LUN paths

When you specify host groups and open the Add LUN Paths window, the specified iSCSI target must be assigned to the Storage Administrator group permitted to manage them.

When you specify LDEVs and open the Add LUN paths window, the specified LDEVs must be assigned to the Storage Administrator group permitted to manage them.

Delete LUN paths

When you specify an iSCSI target and open the Delete LUN Paths window, the specified iSCSI target must be assigned to the Storage Administrator group permitted to manage them.

When you specify LDEVs and open the Delete LUN Paths window, the specified LDEVs must be assigned to the Storage Administrator group permitted to manage them.

When selecting the Delete all defined LUN paths to above LDEVs check box, the iSCSI target of all the alternate paths in the LDEV displayed on the Selected LUNs table must be assigned to the Storage Administrator group permitted to manage them.

Add hosts

The specified iSCSI target must be assigned to the Storage Administrator group permitted to manage them.

Edit hosts

The specified iSCSI target must be assigned to the Storage Administrator group permitted to manage them.

When you select the Apply same settings to the HBA WWN of all ports check box, all the iSCSI targets where the specified HBA WWNs are registered must be assigned to the Storage Administrator group permitted to manage them.

Remove hosts

The specified iSCSI target must be assigned to the Storage Administrator group permitted to manage them.

Edit ports

The specified port must be assigned to the Storage Administrator group permitted to manage them.

Create alternative LUN paths

The specified iSCSI target and all the LDEVs where the paths are set to the iSCSI target must be assigned to the Storage Administrator group permitted to manage them.

Copy LUN paths

The specified iSCSI target and the LDEVs where the paths are set must be assigned to the Storage Administrator group permitted to manage them.

Edit command devices

LDEVs where the specified paths are set must be assigned to the Storage Administrator group permitted to manage them.

Edit UUIDs

The specified LDEV must be assigned to the Storage Administrator group permitted to manage them.

Delete UUIDs

The specified LDEV must be assigned to the Storage Administrator group permitted to manage them.

Release Host-Reserved LUNs

LDEVs where the specified paths are set must be assigned to you.

Create iSCSI targets

When you open the Create iSCSI targets window by specifying iSCSI targets, the specified iSCSI targets must be assigned to the Storage Administrator group permitted to manage them.

Edit iSCSI targets

The specified iSCSI targets and ports must be assigned to the Storage Administrator group permitted to manage them.

Delete iSCSI targets

The specified iSCSI targets and all the LDEVs where the paths are set to the iSCSI targets must be assigned to the Storage Administrator group permitted to manage them.