The following figure shows an example of part of a ports report. The actual report includes several more columns of information. The table following the figure describes the items in the report.
|
Item |
Description |
|---|---|
| CHB | Name of the channel board |
| Type | Package type of the channel board |
| Port Location | Name of the port on the channel board |
| iSCSI Virtual Port Mode | Mode of the iSCSI virtual port |
| TCP Port Number | Port number to use for a socket (decimal) |
| Internal WWN / Internal iSCSI Name | WWN / iSCSI name of the port |
| Fabric | One of the Fibre topology settings indicating the setting status of the Fabric switch |
| Connection Type | One of the Fibre topology settings
|
| IPv4 : IP Address |
IPv4 address of the port Output example: 192.168.0.100 |
| IPv4 : Subnet Mask |
IPv4 subnet mask of the port Output example: 255.255.255.0 |
| IPv4 : Default Gateway |
IPv4 default gateway of the port Output example: 255.255.255.0 |
| IPv6 : Mode | IPv6 settings of the port
|
| IPv6 : Link Local Address | IPv6 link local address of the port (16-digit hexadecimal) |
| IPv6 : Global Address |
IPv6 global address of the port. Output example: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (hexadecimal) |
| IPv6 : Global Address 2 |
IPv6 global address 2 of the port. Output example: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx (hexadecimal) |
| IPv6 : Assigned Default Gateway | Assigned IPv6 default gateway |
| Selective ACK | Selective ACK mode
|
| Ethernet MTU Size (Byte) | MTU settings (binary)
|
| Keep Alive Timer | iSCSI keep alive timer (0 to 64,800) (sec) |
| VLAN : Tagging Mode | Tagging mode of VLAN
|
| VLAN : ID | Number of VLAN set to the port (1 to 4,094) |
| CHAP User Name | User name for the CHAP authentication |
| iSNS Server : Mode | iSNS mode settings
|
| iSNS Server : IP Address | IP address of the iSNS server (30 to 65,535) |
| iSNS Server : TCP Port Number | Number of the TCP port used in iSNS (binary) |
| Address (Loop ID) | Fibre port address and Loop ID of the port |
| Port Security | Security of the port
|
| Speed | Data transfer speed of the port |
| SFP Data Transfer Rate | Maximum transfer rate of SFP which the mounted package
supports.
|
|
T10 PI Mode |
Indicates whether the T10 PI mode can be applied to the port.
|
| Resource Group Name | Name of the resource group to which the port belongs |
| Resource Group ID | ID for the resource group to which the port belongs (0 to 1023) |
| Number of Hosts | The number of the hosts registered to the port |
| Number of LUNs | The number of the LU paths defined to the port |
| Number of LDEVs | The number of the logical volumes that can be accessed through the port |
| Number of PGs | The number of the parity groups having the logical volumes that can be accessed through the port |
| Number of DKBs | The number of the disk boards controlling the parity group that contains the logical volumes that can be accessed through the port |