Using the SMI-S function

System Administrator Guide for VSP E990 and VSP G130, G/F350, G/F370, G/F700, G/F900
Version
88-08-0x
Audience
anonymous
Part Number
MK-97HM85028-11

To use the SMI-S function, create a Device Manager - Storage Navigator user account and specify a storage system as the access destination from the management software.

  1. Create a Device Manager - Storage Navigator user account in the management software. The user account must belong to one of the following built-in user groups:
    • Storage Administrator (Initial Configuration)
    • Storage Administrator (System Resource Management)
    • Storage Administrator (Provisioning)
    • Storage Administrator (Performance Management)
    • Storage Administrator (Local Copy)

    When the user accesses the SMI-S function with the read-only access authority, the user account must belong to one of the following built-in user groups:

    • Storage Administrator (Remote Copy)
  2. In the management software program, enter the following storage system information:
    • IP Address of the SVP
    • Protocol: specify HTTPS
    • Port: 5989
      Note: The allocation method of the port numbers to be used varies depending on the SVP software versions.
    • Namespace:root/hitachi/smis or interop