Detailed Information 1
|
Item |
Description |
|---|---|
|
Copy Type |
The program product name for this operation TC: TrueCopy |
|
P-VOL(Port-G-ID-LUN) |
The port number, host group number, and LUN of the volume specified to the primary volume |
|
S-VOL(Port-G-ID-LUN) |
The port number, host group number, and LUN of the volume specified to the secondary volume |
|
S/N |
The serial number of the RCU |
|
LDKC |
The LDKC number of the RCU |
|
ID |
The path group ID When the path group ID is default setting, "Default" is output. |
|
Controller ID |
The controller ID of the RCU 7: VSP G1000/G1500 and VSP F1500, 8: VSP 5000 series, 18: VSP E series, VSP G130, G/F350, G/F370, G/F700, G/F900, VSP G200, G400, G600, G800, and VSP F400, F600, F800, 19: HUS VM |
|
Type |
Type of the update copy operation Outputs Sync (synchronization mode) as a fixed parameter. |
|
Initial Copy |
Type of the pair creation operation Entire: Creates pairs and copies data from the primary volume to the secondary volume. None: Creates pairs but does not copy data from the primary volume to the secondary volume. |
|
Fence Level |
Configured fence level (conditions where the local storage system rejects write operations to the primary volume) Never: Can write to the primary volume even the pair is split. Data: Cannot write to the primary volume when update copying fails. Status: Cannot write to the primary volume, only when the storage system of the primary site cannot change the pair status of the secondary volume to PSUE. |
|
Copy Pace |
The initial copy speed setting (the number of tracks you can copy at one time) |
|
Priority |
The priority of the set initial copy operation (scheduling order). |
|
Result |
The result of the operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end where xxxx: Part code, yyyyy: Error code |
|
Num. of Pairs |
The number of create pairs |
Detailed Information 2
|
Item |
Description |
|---|---|
|
Copy Type |
The program product name for this operation UR: Universal Replicator |
|
P-VOL(Port-G-ID-LUN) |
The port number, host group number, and LUN of the primary data volume |
|
S-VOL(Port-G-ID-LUN) |
The port number, host group number, and LUN of the secondary data volume |
|
MirrorID |
The mirror ID |
|
S/N |
The serial number of the RCU |
|
CTRLID |
The controller ID of the RCU 7: VSP G1000/G1500 and VSP F1500, 8: VSP 5000 series, 18: VSP E series, VSP G130, G/F350, G/F370, G/F700, G/F900, VSP G200, G400, G600, G800, and VSP F400, F600, F800, 19: HUS VM |
|
Priority |
The priority of the set initial copy operation (scheduling order). |
|
CTG |
The consistency group ID |
|
Initial Copy |
Type of the pair creation operation Entire: Creates pairs and copies data from the primary volume to the secondary volume. None: Creates pairs but does not copy data from the primary volume to the secondary volume. Delta: Creates delta resynchronization pairs. |
|
M-JNL |
The master journal number |
|
R-JNL |
The restore journal number |
|
Path Gr. ID |
The path group ID specified for the storage system When the path group ID is default setting, "Default" is output. |
|
Error Level |
Range of the pair split at failure occurrence Mirror: When a pair fails, all the pairs are split that exist in the same mirror as the pair. LU: When a pair fails, only the pair is split. |
|
Result |
The result of the operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end where xxxx: Part code, yyyyy: Error code |
|
Num. of Pairs |
The number of created pairs |
Detailed Information 3
|
Item |
Description |
|---|---|
|
Copy Type |
The program product name for this operation GAD: global-active device |
|
P-VOL(Port-G-ID-LUN) |
The port number, host group number, and LUN of the primary volume |
|
S-VOL(Port-G-ID-LUN) |
The port number, host group number, and LUN of the secondary volume |
|
S/N_P |
The serial number of the local storage system |
|
S/N_S |
The serial number of the remote storage system |
|
Path Gr.ID |
Path group ID used in a global-active device pair |
|
Controller ID |
The controller ID of the remote storage system 7: VSP G1000/G1500 and VSP F1500, 18: VSP E series, VSP G130, G/F350, G/F370, G/F700, G/F900, VSP G200, G400, G600, G800, and VSP F400, F600, F800, 19: HUS VM |
|
SSID |
The SSID |
|
Copy Pace |
The setting of the initial copy speed (the number of tracks that can be copied at a time) |
|
Quorum Disk ID |
The quorum disk ID used by global-active device |
|
MirrorID |
The mirror ID |
|
CTG |
The consistency group ID A hyphen (-) is displayed if the consistency group is not specified. |
|
Initial Copy |
Type of the pair creation operation Entire: Creates pairs and copies data from the primary volume to the secondary volume. None: Creates pairs but does not copy data from the primary volume to the secondary volume. |
|
Result |
The result of the operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end where xxxx: Part code, yyyyy: Error code |
|
Num. of Pairs |
The number of created pairs |
Example 1: Copy type is TC
RMI AP,,[Remote Replication],Create Pairs,,Normal end,Seq.=xxxxxxxxxx
+Copy Type=TC,{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),
S/N,LDKC,ID,Controller ID,Type,Initial Copy,Fence Level,Copy Pace,
Priority,Result}
=[{1A-0x00-0,GR-0xFE-1023,411111,0x00,Default,18,
Sync,Entire,Never,15,032,Normal end},(Snip)-(Snip)],
Num. of Pairs=xx
Example 2: when the copy type is UR
RMI AP,,[Remote Replication],Create Pairs,,Normal end,Seq.=xxxxxxxxxx
+Copy Type=UR
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),MirrorID,
S/N,CTRLID,Priority,CTG,Initial Copy,M-JNL,R-JNL,
Path Gr. ID,Error Level,Result}
=[{4C-0x00-0,4A-0x00-0,0x00,467676,18,32,0x000,Entire,
0x001,0x001,Default,Mirror,Normal end},
{4C-0x00-1,4A-0x00-1,0x00,467676,18,32,0x000,Entire,
0x001,0x001,Default,Mirror,Normal end}],Num. of Pairs=2
Example 3: when the copy type is GAD
RMI AP,,[Remote Replication],Create Pairs,,Normal end,Seq.=xxxxxxxxxx
+Copy Type=GAD,{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),
S/N_P,S/N_S,Path Gr.ID,Controller ID,SSID,Copy Pace,Quorum Disk ID,
MirrorID,CTG,Initial Copy,Result}=
[{1A-0x00-0,1C-0x02-3,411111,422222,0x00,18,0x0004,15,0x15, 0,
0x00,None,Normal end},(Snip)-(Snip)],Num. of Pairs=xx