Detailed Information
|
Item |
Description |
|---|---|
|
Pool ID |
The pool ID of the created or expanded pool |
|
Pool Type |
The pool type. Dynamic Provisioning: Dynamic Provisioning, Thin Image: Thin Image |
|
Multi Tier Pool |
The setting status of the multi-tier mode and active flash function for the created or expanded pool Enable(Active Flash): Both Dynamic Tiering and active flash are enabled. Enable: Dynamic Tiering is enabled and active flash is disabled. Disable: Both Dynamic Tiering and active flash are disabled. If Pool Type is Thin Image, a hyphen (-) is output. |
|
Warning Threshold(%) |
The warning threshold of the usage rate of the created pool. The unit is indicated as a percentage. If Execute Command is Expand, a hyphen (-) is output. |
|
Depletion Threshold(%) |
The depletion threshold of the usage rate of the created pool. The unit is indicated as a percentage. If Pool Type is Thin Image, if the depletion threshold is not specified, or if Execute Command is Expand, a hyphen (-) is output. |
|
Subscription Limit(%) |
The reserve amount of the created pool. The unit is percent (%). If the reserve amount is not specified, it outputs "Unlimited". If Pool Type is Thin Image, or if Execute Command is Expand, a hyphen (-) is output. |
|
Protect V-VOLs when I/O fails to Blocked Pool VOL |
Indicates whether the setting of the protect access attribute on the virtual volume is enabled or disabled when the pool is blocked. Yes: Enabled, No: Disabled If Pool Type is not Dynamic Provisioning, or if Execute Command is Expand, a hyphen (-) is output. |
|
Protect V-VOLs when I/O fails to Full Pool |
Indicates whether the setting of the protect access attribute on the virtual volume is enabled or disabled when the pool is full. Yes: Enabled, No: Disabled If Pool Type is not Dynamic Provisioning, or if Execute Command is Expand, a hyphen (-) is output. |
|
Tier Management |
The auto control mode of the created or expanded pool Auto: Auto, Manual: Manual If Multi Tier Pool is not Enable, a hyphen (-) is output. |
|
Cycle Time |
The cycle of performance monitoring for the created pool 0.5: every thirty minutes, 1: every one hour, 2: every two hours, 4: every four hours, 8: every eight hours, 24: every twenty-four hours If Tier Management is not Auto, or if Execute Command is Expand, a hyphen (-) is output. |
|
Monitoring Period |
The monitoring period of the pool. Format: "H1:M1-H2:M2" H1: The time when the monitoring starts (hour) M1: The time when the monitoring starts (minute) H2: The time when the monitoring ends (hour) M2: The time when the monitoring ends (minute). If Cycle Time is not 24, or if Execute Command is Expand, a hyphen (-) is output. |
|
Monitoring Mode |
The monitoring mode Continuous Mode: Continuous mode, Period Mode: Period mode If Multi Tier Pool is not Enable, or if Execute Command is Expand, a hyphen (-) is output. |
|
Relocation Speed |
The relocation speed 1: Slowest, 2: Slower, 3: Normal, 4: Faster, 5: Fastest If Multi Tier Pool is not Enable, or if Execute Command is Expand, a hyphen (-) is output. |
|
Data Direct Mapping |
Indicates the setting status of Data Direct Mapping Enable: Data Direct Mapping is enabled. Disable: Data Direct Mapping is disabled. If Execute Command is Expand, a hyphen (-) is output. |
|
Suspend TI pairs when depletion threshold is exceeded |
Indicates the setting status of Suspend Thin Image pairs when depletion threshold is exceeded Yes: Suspend Thin Image pairs is enabled when the depletion threshold is exceeded. No: Suspend Thin Image pairs is disabled even if the depletion threshold is exceeded. If Execute Command is Expand, a hyphen (-) is output. |
|
Pool Result |
The result of pool creation or expansion Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end, Not Execute: Not Executed xxxx: Part code, yyyyy: Error code |
|
Execute Command |
The executed operation Create: Pools are created. Expand: Pools are expanded. If Pool Result is not Normal end, a hyphen (-) is output. |
|
Num. of Pools |
The number of created or expanded pools |
|
LDKC:CU:LDEV |
The LDKC number, the CU number and the LDEV number of the pool volume assigned to the created or expanded pool |
|
External LDEV Tier Rank |
The external LDEV tier rank of the pool volume assigned to the created or expanded pool High: An external volume (High) Middle/Internal: An external volume (Middle) or an internal volume Low: An external volume (Low) |
|
LDEV Result |
The result of creating or expanding pools per pool volume Normal end: Normal end, Error(xxxx-yyyy): Abnormal end, Not Execute: Not Executed xxxx: Part code, yyyy: Error code |
|
Num. of LDEVs |
The number of created or expanded pool volume. |
Example
RMI AP,Task Name,[PROV],Create/Expand Pools,,Normal end,
Seq.=xxxxxxxxxx
+{Pool ID,Pool Type,Multi Tier Pool,Warning Threshold(%),
Depletion Threshold(%),Subscription Limit(%),
Protect V-VOLs when I/O fails to Blocked Pool VOL,
Protect V-VOLs when I/O fails to Full Pool,
Tier Management,Cycle Time,Monitoring Period,Monitoring Mode,
Relocation Speed,Data Direct Mapping,Suspend TI pairs when depletion threshold is exceeded,Pool Result,Execute Command}
=[{1,Dynamic Provisioning,Enable,20,70,100,Yes,Yes,Auto,24,
00:00-23:59,Continuous Mode,3,Disable,Yes,Normal end,Create}],
Num. of Pools=1
++{LDKC:CU:LDEV,External LDEV Tier Rank,LDEV Result}
=[{0x00:0x00:0x00,Middle/Internal,Normal end},
{0x00:0x00:0x01,Middle/Internal,Normal end},
{0x00:0x00:0x02,Middle/Internal,Normal end}],Num. of LDEVs=3